Instructions for Fascia Removal of 2021 Volkswagen ID 4 for Draw Tite Hitch Install

Question

Question:

I have experience installing 5-6 hitches from etrailer. None have required bumper fascia removal. Are there instructions and or video on properly releasing the clips and hardware as well as a recommended procedure for removing my bumper?

asked by: Ken Q

1

Helpful Expert Reply:

I attached a link to a set of install instructions for the Draw Tite hitch part # DT84GR that fits your 2021 Volkswagen ID 4 that details how the rear bumper fascia gets removed. All of the clips that need to get removed for the fender wells and the fascia are circled and explained.

expert reply by: Jameson C

1

Answer 1

We actually have exactly what you are looking for; a 2 inch trailer hitch receiver to replace the 1-1/4 inch factory receiver on your 2021 Volkswagen ID.4: - Curt Trailer Hitch Receiver #C57JR I have added a cut out of the installation instructions…

view full answer...

Answer 2

The Curt hitch part #C47JR does not extend out nearly as much as the Draw Tite part #DT84GR that fits your 2021 Volkswagen ID 4. If you were looking for something more recessed you'd want the Curt.

view full answer...

Answer 3

The Draw-Tite Max-Frame Trailer Hitch Receiver #DT84GR is currently the only receiver confirmed to fit on your 2022 Volkswagen ID.4. As of today 7/18/2022 the Curt Trailer Hitch Receiver #C47JR has not been confirmed by Curt to fit or not fit your…

view full answer...

Answer 4

We do have a wiring harness as well as a trailer hitch receiver that fits your 2021 Volkswagen ID 4, which are the following part numbers: - Curt Trailer Hitch Receiver #C47JR - Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...