Trailer Hitch Receiver & Trailer Wiring Fit For 2021 Volkswagen ID 4

Question

Question:

Hello, do you provide/supply/have an available universal electric connector and harness for trailer lights? Thank you

asked by: ROMAN

0

Expert Reply:

We do have a wiring harness as well as a trailer hitch receiver that fits your 2021 Volkswagen ID 4, which are the following part numbers:

- Curt Trailer Hitch Receiver # C47JR

- Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236.

expert reply by: Kyle S

0

Answer 1

There are only Class 3 hitches with a 2 inch receiver for your 2022 Volkswagen ID.4, and the one with the highest capacity is from Curt: - Curt Trailer Hitch Receiver #C47JR The #C47JR is rated for 3,000 lbs towing/300 lbs tongue weight, which is…

view full answer...

Answer 2

Yes, the Curt Trailer Hitch Receiver #C47JR has been confirmed to fit the 2023 Volkswagen ID 4. If you let me know what you plan on using the hitch for I'd be more than happy to make a recommendation for you! Attached are the installation…

view full answer...

Answer 3

To remove the Tekonsha Prodigy P2 #90885 you simply need to detach the harness at the rear of the brake controller. Once that is removed you can tuck the harness up under your dash with some zip ties andthe uninstall the bracket that holds the brake…

view full answer...

Answer 4

No, it won't void the warranty. When installing a hitch on a vehicle, like the Curt Trailer Hitch #C47JR on your 2021 Volkswagen ID 4, you are protected by the Federal Magnuson-Moss Warranty Act. The Act states that if something breaks on your…

view full answer...

Answer 5

The Curt hitch part #C47JR does not extend out nearly as much as the Draw Tite part #DT84GR that fits your 2021 Volkswagen ID 4. If you were looking for something more recessed you'd want the Curt.

view full answer...

Answer 6

I reached out to Curt who informed me that you will need to use the Curt Trailer Hitch Receiver #C57JR on your 2021 Volkswagen ID 4 Pro S 4wd that comes with the factory hitch. This will bolt in place of the 1-1/4" receiver and give you the…

view full answer...

Answer 7

For your 2022 Volkswagen ID 4 I recommend checking out the: -Curt Trailer Hitch Receiver #C47JR. This trailer hitch has a maximum weight capacity of a 3,000-lbs, a maximum tongue weight capacity of 300-lbs, and features a bolt on installation. It…

view full answer...

Answer 8

You don't need an adapter to go down in size you need a reducer. A reducer also allows you to keep more of your tongue weight capacity at 300 lbs on your 2021 Volkswagen ID 4 and your Curt Trailer Hitch Receiver item #C47JR. I recommend the…

view full answer...

Answer 9

I can definitely help and point you in the right direction. Right now we have 2 hitches available for the 2023 models. It will just depend on whether your vehicle has a factory hitch receiver or not. If you do have a factory hitch I recommend the…

view full answer...

Answer 10

You will need to check your 2023 Volkswagen ID.4 S Pro Plus to verify the Curt Trailer Hitch Receiver #C57JR can be installed. I have linked the installation instructions below showing where the mounting plate is for the factory receiver this is…

view full answer...

Answer 11

The Curt Trailer Hitch Receiver #C47JR for your 2023 Volkswagen ID.4 Pro RWD will not cause any issues with the rear collision sensors by itself. When you have attached a Bike Rack #TH903202, Cargo Carrier #C18151, or Ball Mount #C45554 for towing a…

view full answer...

Answer 12

Sounds like you would be interested in the Hopkins Trailer Connector part #HM47675. This will plug into a 7-way and will provide you with a cigarette lighter 12 volt outlet. I attached a review video for this product for you to check out as well.

view full answer...

Trailer Hitch Receiver & Trailer Wiring Fit For 2021 Volkswagen ID 4

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching