Does Lippert/HappiJac LC182894 Upgrade Kit for Slide In Camper Turnbuckles Carry a Weight Capacity

Question

Question:

Hello, what is the load rating on these? Trying to build my own system and want the potential fail point to not be the most expensive part of the system.

asked by: J.D

0

Expert Reply:

According to HappiJack, their turnbuckles that the # LC182894 are meant to be used with do not carry a weight rating or a capacity. When the turnbuckles are installed properly, they are designed to have sufficient capacity to handle the weight of any slide in camper that would fit on a stock pickup truck bed.

expert reply by: Mike L

0

Answer 1

The HappiJac Qwik-Load Upgrade Kit for Standard Turnbuckles part #LC182894 is an excellent upgrade option for the HappiJac Original Turnbuckles for Camper Tie-Downs part #LC182898. These are going to cut down dramatically on the time it takes to…

view full answer...

Answer 2

From the information available to me, the Lance 1062 truck camper is 20' in length. The overall length of the Classic Accessories Truck Camper Cover ids 19-11/16' #CA80037 in length. I suggest verifying that your Lance 1062 is a true…

view full answer...

Answer 3

You are correct in that the RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS3613-HD will not fit if your truck has top overload springs. These can be identified by looking at the top of your leaf springs and will basically look like…

view full answer...

Answer 4

If your 2014 Ram 2500 Crew Cab 8 foot bed has factory installed hitch and step boards the Torklift front tie downs #TLD2127 and rear #TLD3109 will clear your steps as long as they are not aftermarket Mopar rear-mounted kick out steps that are…

view full answer...

Answer 5

I checked with Torklift and the front tie down set part #TLD2127 that you referenced is a fit for your 2017 Ram 2500HD 4x4, regular cab, 8 foot bed. The correct rear set you'd need is the part #TLD3109.

view full answer...

Answer 6

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 7

Yes it is. The Black Armour Heavy-Duty Custom Truck Bed Mat item #BA67AR does come in two parts. This mat is confirmed to fit the 8' bed length of the 2022 Ford F-250. We do have a one piece option for a custom fit rubber bed liner for your…

view full answer...

Answer 8

For your 2014 Chevrolet Silverado 3500 you're going to want the TorkLift Camper Tie-Downs #TLC2219 for the front rear #TLC3212. You're also going to need a set of turnbuckles #TLS9020 to secure your camper to the tie downs.

view full answer...

Answer 9

I went ahead and reached out to Torklift, and they confirmed what you need to in order to remove the gas tank cover on your vehicle to install the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLF2016. The cover drops down and gives you…

view full answer...

Answer 10

We do have the replacement front anchor plates for the Happijac camper tie-downs for your 2005 Chevy Silverado 3500, with the correct part being the following: - Replacement Front Anchor Plates for HappiJac Truck-Mounted Camper Tie-Downs #LC182872

view full answer...

Answer 11

The correct HappiJac Custom Tie-Downs for Truck Bed Camper for a 2015 Ford F-250 6-3/4' Bed Cab Length Boards/Rails is part #LC182910-182971. In regards to the running boards/nerf bars, this is only an issue if they extend past the cab. For…

view full answer...

Answer 12

HappiJac hasn't really developed a great solution for licking their turnbuckles yet. There are some options, but it also depends on what HappiJac turnbuckles that you have. If you have the HappiJac Qwik-Load Turnbuckles #LC182895, you would…

view full answer...