Torklift Tie Down Recommendation for 2017 Ram 2500 Heavy Duty 4x4 Regular Cab 8 ft Bed

Question

Question:

Hello, Will this work for 2017 Ram 2500 Heavy Duty 4x4 Single cab 8ft bed. I have a step that mounts under the cab. The part description says Club cab, and board under bed. See attached picture, thanks!!!!

asked by: William H

0

Expert Reply:

I checked with Torklift and the front tie down set part # TLD2127 that you referenced is a fit for your 2017 Ram 2500HD 4x4, regular cab, 8 foot bed.

The correct rear set you'd need is the part # TLD3109.

expert reply by: Jameson C

0

click to enlarge

Answer 1

If your 2014 Ram 2500 Crew Cab 8 foot bed has factory installed hitch and step boards the Torklift front tie downs #TLD2127 and rear #TLD3109 will clear your steps as long as they are not aftermarket Mopar rear-mounted kick out steps that are mounted…

view full answer...

Answer 2

There are two ways to wire up two batteries. One way doubles the volts of the two batteries and the other keeps the same amount of volts. In parallel the voltage stays the same and in series it is doubled. Check out the diagram for more info.

view full answer...

Answer 3

The HappiJac Qwik-Load Upgrade Kit for Standard Turnbuckles part #LC182894 is an excellent upgrade option for the HappiJac Original Turnbuckles for Camper Tie-Downs part #LC182898. These are going to cut down dramatically on the time it takes to…

view full answer...

Answer 4

According to HappiJack, their turnbuckles that the #LC182894 are meant to be used with do not carry a weight rating or a capacity. When the turnbuckles are installed properly, they are designed to have sufficient capacity to handle the weight of any…

view full answer...

Answer 5

You are correct in that the RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS3613-HD will not fit if your truck has top overload springs. These can be identified by looking at the top of your leaf springs and will basically look like…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 8

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 9

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 10

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

For frame mounted camper tie downs that are a confirmed fit for your 2016 Dodge Ram 3500 Dually we have the TorkLift camper tie downs part numbers #TLD2131 for the front and part #TLD3109 for the rear.

view full answer...

Torklift Tie Down Recommendation for 2017 Ram 2500 Heavy Duty 4x4 Regular Cab 8 ft Bed

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching