Compatibility of Equal-i-zer EQ90-02-4500 Shank with Reese Trunnion Weight Distribution Head

Question

Question:

will my Reese trunion bolt on to this with no issues

asked by: William E

0

Expert Reply:

The Equal-i-zer # EQ90-02-4500 weight distribution shank is constructed of 2 inch square bar stock, and has the height adjustment holes spaced at the industry standard 1-1/4 inches apart, center to center. It will work perfectly with your Reese Trunnion weight distribution head. The two will be 100% compatible.

I've linked to a product description video for the # EQ90-02-4500 weight distribution shank.

expert reply by: Mike L

0

Answer 1

The Equal-i-zer Weight Dist Shank part #EQ90-02-4500 has a 1,400 lb tongue weight capacity. If you are using this shank on a system rated for less, this won't increase the capacity of the system but it can decrease the capacity of the system if…

view full answer...

Answer 2

We have a solution that may work for you. While Equal-i-zer, or any other manufacturer do not manufacturer an 18" neck with 2.5 shank they do have an 18" neck. Equal-i-zer Weight Dist Shank #EQ90-02-4500 and #EQ90-02-4600 could be used with…

view full answer...

Answer 3

Yes the Equal-i-zer Shank part #EQ90-02-4500 will work great with your EAZ weight distribution system that you have.

view full answer...

Answer 4

It sounds like you are looking for a weight distribution system with extended shank and if that is the case I have some great options. The Equal-i-zer Weight Dist Shank part #EQ90-02-4500 measures 18" long overall and offers up to a 3"…

view full answer...

Answer 5

In order to extend your hitch on your 2015 Toyota Tundra, I recommend looking into a longer shank for your weight distribution system, as this will be your only safe option. The Equal-i-zer Weight Dist Shank #EQ90-02-4500 has a distance of 14"…

view full answer...

Answer 6

Some extensions are not safe to use for towing no matter the weight. I do have an option for you, but it does require a weight distribution system for your 5K travel trailer. I recommend the Brophy Hitch Extender with Step #ST18. With the proper…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...