Ball Mount Platform that Fits Weight Distribution Shank with Sway Control Tab

Question

Question:

I’m looking for a particular ball mount compatible with the “ Equal-i-zer Weight Dist Shank - 18 Long - 7 Rise, 3 - 600 to 1,400 lbs TW” I am trying to find a 2 5/16 ball with the sway control tab and ball but cannot find one on your site. Can you point me in the right direction?

asked by: Johnny S

0

Expert Reply:

For a ball mount platform with a tab that would allow a friction sway control to attach we have the Magnum Ball Mount Adapter part # TLM9005.

expert reply by: Jameson C

0

Answer 1

The highest tongue weight rated weight distribution system we have is the TorkLift SuperHitch part #TLWD1000 which has a tongue weight range of 1,500 to 3,000 lbs. This does require you to have a dual Torklift Hitch setup on your truck though so I…

view full answer...

Answer 2

Yes, the Magnum Ball Mount Adapter #TLM9005 that you referenced does fit the Torklift Adjustable Shank part #TLM9000 that you referenced.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

For a hitch I recommend the Curt #C94WR. This fits all models of the 2024 Kia Sportage including your PHEV. This is a Class III hitch with a 2" receiver and a max gross trailer weight of 3,500 lbs. It has a simple bolt-on installation and comes…

view full answer...

Answer 11

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 12

The 8-14.5 tires are an older metric size no longer used today. Therefore, you would need to replace these along with the wheels in order to update them. In order to see if we have any options for you, we'd first need to determine the bolt…

view full answer...

Ball Mount Platform that Fits Weight Distribution Shank with Sway Control Tab

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching