Does Torklift Ball Mount Adapter # TLM9005 Fit on Torklift Adjustable Shank # TLM9000

Question

Question:

I have torklift m9000 and need to know if torklift m9005 ball mount will work with this? I have 3/4 holes.

asked by: John R

0

Expert Reply:

Yes, the Magnum Ball Mount Adapter # TLM9005 that you referenced does fit the Torklift Adjustable Shank part # TLM9000 that you referenced.

expert reply by: Jameson C

0

Answer 1

The Reese weight distribution system shanks have 3/4 inch holes built into them that are spaced 1-1/4 inches apart. The Torklift weight distribution shanks like the part #TLM9001 also match these dimensions so a Reese head would fit the shank. So if…

view full answer...

Answer 2

For a ball mount platform with a tab that would allow a friction sway control to attach we have the Magnum Ball Mount Adapter part #TLM9005.

view full answer...

Answer 3

The highest tongue weight rated weight distribution system we have is the TorkLift SuperHitch part #TLWD1000 which has a tongue weight range of 1,500 to 3,000 lbs. This does require you to have a dual Torklift Hitch setup on your truck though so I…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Does Torklift Ball Mount Adapter # TLM9005 Fit on Torklift Adjustable Shank # TLM9000

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching