Trailer Lift Kit For Stock Trailer
Question:
I recently purchased a used stock trailer. It sits so low to the ground that I actually flipped the axles, only to find that raised it way too much. I am currently looking at this kit Tandem-Axle Trailer Hanger Kit for 2inch Slipper Springs - 13-1/8inch Long Equalizers. I wanted to know that if I installed this kit if it would give me a few inches lift. Thats all I need. will this kit do it? thanks
asked by: Devin N
Expert Reply:
The Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs # AP216-H238 you referenced is a good option, alternatively, the Torflex Lift Kit # K71-724-02 is another option that is compatible with #11 Torflex axles with 4,100-6,000-lb capacity; And will work as long as your axle uses side mounted brackets, however torsion axles that mount from the top cannot use lift kits.
This kit will work as long as your axles do not use 3" tall brackets.
Products Referenced in This Question
Torflex Lift Kit - Tandem Axle - 2-7/8" Lift
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Tandem Axle
- Dexter
more information >
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Raise Your Travel Trailer Height
- Shop: Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 2" Long
- Shop: Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter
- Search Results: leaf spring hanger
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Q&A: Recommended Bolt Compatible with Center Hanger for 2 Inch Wide Slipper Springs
- Q&A: Which Wet Bolt to Use with the Slipper Spring Equalizer TRFA71063
- Q&A: Recommended 2 Slipper Spring Hanger Kit For Tandem Axle Trailer W/ 5200-7000lb Axles
- Search Results: nylon leaf spring bushings
- Q&A: Should Bolts be Tightened Down Completely on Leaf Spring Hangers
- Q&A: How to Determine Hanger Spacing on a Tandem-Axle Trailer Hanger Kit for Slipper Springs
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - APT6SE Review
- Video: Review of MORryde Trailer Leaf Spring Suspension - 3 Axle Mounting U Bolts - MR66ZR
- Video: Review of Redline Trailer Leaf Spring Suspension - Hangers - Suspension Kits - HAP-105-205-01
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 29-1 Review
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - 721584 Review
- Video: Dexter Axle Trailer Axles K71-724-02 Review
- Video: TruRyde Trailer Suspension TRFA71063 Review
- Search Results: rear hanger
- Search Results: leaf spring bushings
- Search Results: leaf spring suspension
- Search Results: slipper spring hardware
- Search Results: trailer leaf spring suspension
- Shop: Torflex Lift Kit - Tandem Axle - 2-7/8" Lift
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer