What Wiring Goes to Pollak Single-Pole, Round Pin Trailer Wiring Socket - Vehicle End PK11851

Question

Question:

i am looking for the vehicle wiring that goes to the pollak single-pole round pin trailer wiring socket vehicle end. which is part #PK11851. thanks in advance for the help.

asked by: Jim D

0

Expert Reply:

While we don't offer it, what you'll need is 00 gauge wire for the Pollak Single-Pole, Round Pin Trailer Wiring Socket - Vehicle End # PK11851.

You'll simply solder that size wire into the socket; that wire size can be found at any type of local hardware store.

expert reply by: Kyle S

0

Answer 1

The 12 volt circuit on a 7-Way trailer connector can provide a maintenance charge to a 12 volt battery but it will not be able to fully charge it because the wiring for a 7-Way is too small to carry the current required. What you can do to charge the…

view full answer...

Answer 2

The only option we can offer to run a large gauge wire between the trailer and tow vehicle is with the Pollak Single-Pole, Round Pin Trailer Wiring Socket part #PK11851 and the Pollak Single-Pole, Round Pin Trailer Wiring Connector part #PK11852. The…

view full answer...

Answer 3

As long as you do not exceed the 300 amp rating of the Pollak Single-Pole, Round Pin Trailer Wiring Socket part #PK11851 then this would work for you. For the male end of the above socket you would want to use the Pollak Single-Pole, Round Pin…

view full answer...

Answer 4

The Pollak Single-Pole, Round Pin Trailer Wiring Socket #PK11851 and plug part #PK11852 are rated for 300 amps of continous use like you mentioned. They can accept up to 00 gauge wire which is very thick.

view full answer...

Answer 5

The #PK11851 Single Pole Round Pin Trailer Connector is designed to deliver power to a trailer. It is not grounded, as the battery on the tow vehicle is already grounded and trailer mounted equipment is typically grounded as well. The ground…

view full answer...

Answer 6

If you are looking for a single pole connector to use as a charge line for the batteries of your RV the part numbers #PK11851 and #PK11852 would be a great choice. These connectors can accept wire gauge up to 00.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...