Picking Out Replacement Leaf Spring for 2005 Forest River Toy Hauler F29 with 6k Axles  

The reason why changing from a 4-leaf double-eye springs, like part #e47SR, to a 5-leaf double-eye spring of the same capacity, like part #e34SR, won't matter in a situation like what you have is because it's all about the strength of…

The best way to determine which leaf springs will work as a replacement is by measuring the old springs from the eye center to eye center. For your 5200-lb Lippert axle, most of your options are going to be fairly close in length. Your axle has 2…

The #e47SR leaf springs you'd looked at are designed for 6K capacity axles. In order to get an accurate measurement of your leaf springs, you'll need to put the 5th wheel up on jack stands so the axles hang freely. Then measure the center eye…

I would be happy to help you find the correct replacement springs for your 2002 Fleetwood Prowler Sit 26A but you will need to verify the length of leaf spring your trailer uses, and the axle rating. You can find the axle rating by looking on the…

The only difference between a 4 leaf spring and a 5 leaf spring like the #e34SR is that the 4 leaf spring will use slightly thicker leaves and is 1/8 of an inch shorter. To get the best measurement of your existing springs, measure the center eye to…

I would be happy to help! Since your 2018 Keystone Cougar 311 RES 5th wheel with tandem 5200lb Dexter axles has the Dexter 072-097-00 leaf springs currently installed the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long #e34SR…

From what I have found, you have 4,400 lb axles on your 2010 Keystone Cougar 26BHSWE. Your axles have a hub face measurement of 85" and a 68-1/2" spring center. Unfortunately, 4,400 lb axles are no longer being made so you will also be…

I do have an option for your 2013 Keystone Cougar 325SRX TH. We have the Trailer Axle Beam with Easy Grease Spindles #e45GR which has the 5200lb rating you need, along with the 86-1/2" hub face measurement you are needing, and then a local…

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…