Recommended Brake Controller and Installation on 2021 Toyota RAV4

Question

Question:

Hello, Going to install a hitch, either Curt or Draw-Tite, on the above vehicle. I am also installing wiring part number Curt C56434. I could use some help in finding a brake controller and figuring out how to convert the flat 4 pin connector over to a 7 pin on the trailer. The trailer is a single axle weighing dry at 1200 lbs. I would assume I need an adapter of some type to connect to power side of the brake controller to the 7 pin trailer plug. Any advice or options would be helpful. Thank you for the assistance. Tom

asked by: Tom

0

Expert Reply:

I'd be happy to assist you with that.

First, you'll want to choose a brake controller. You could go with a traditionally mounted brake controller like the Tekonsha Primus, part # TK90160. This controller would work perfectly for you, as long as you don't mind having the controller mounted to the underside of the dash to the right of the steering wheel, within easy reach of the driver. Some folks don't care for the appearance of a traditional style brake controller and prefer a remote mounted model like the Redarc Tow-Pro Liberty, part # RED24FR. The Tow-Pro Liberty installs so that the control unit is out of sight under the dash while you control the braking action with a small control knob that can be installed on the dash or the console using an unused switch knockout or a mounting bezel like part # 331-TPSI-001. You will also need the # RED69FR wiring pigtail.

To install the controller, we actually have an # ETBC7 kit that includes all the parts you'll need to complete the installation. An adapter that will convert the 4 pole provided by the # C56434 harness to a 7-way as well as all the wire, hardware and circuit breakers needed are all provided in the kit.

I've linked to some videos that explain how the controllers mentioned above work, as well as to a video explaining how the brake controller installation kit is installed.

expert reply by: Mike L

0

Answer 1

We can absolutely get your 2021 Toyota RAV4 set up with the correct wiring and wireless brake controller to go along with the Curt Trailer Hitch Receiver #C13416. In regards to the bluetooth, wireless brake controller, the technology is great, and…

view full answer...

Answer 2

First you will need the Curt T-Connector Vehicle Wiring Harness #C56434 for your 2020 Toyota RAV4 hybrid. This will gain the signal from your tail lights for the trailer connector. The Universal Installation Kit for Trailer Brake Controller #ETBC7…

view full answer...

Answer 3

Yes, the Curt Trailer Hitch Receiver #C13416, Curt T-Connector Vehicle Wiring Harness #C56434, and Curt Trailer Connector Adapter #C57672 are what you need to tow with your 2022 Toyota RAV4 Hybrid. I do recommend the Universal Installation Kit for…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Recommended Brake Controller and Installation on 2021 Toyota RAV4

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching