Curt Trailer Hitch Installation - 2020 Subaru Ascent Video

To install a 7-Way harness on your 2023 Subaru Ascent, without the towing package, you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt…

The Brophy Pintle Hook for 2-1/2" Hitches part #BR27FR is designed for a 2-1/2" trailer hitch and maintains a 36,000 lb weight capacity when used correctly. That said, the actual weight capacity of the trailer hitch/vehicle can and…

The pin of the Brophy Pintle Hook #BR27FR can not lock the hook in the open position. Is there a reason you'd want ability to do this?

The Brophy Pintle Hook for 2-1/2" Hitches - 36,000 lbs #BR27FR is a very sturdy hitch with a nice powder coat finish. It is definitely heavy duty weighing about 20 lbs and designed for large vehicles with a 2-1/2 inch hitch receiver. It is rated…

I had the Curt #C25VR measured and from the center of the pin hole to the back of the receiver tube will be 3 inches. As long as the shank on your bike rack does not exceed 3 inches past its pin hole, you will be good to go. I will say that most…

You are right to be concerned with the integrity of the vehicle's frame when it comes to towing and tongue weight capacities. The towing and tongue weight capacities of a hitch are just what that specific hitch is rated for and does not transfer…

The best hitch receiver for hauling a bike with your 2022 Subaru Ascent is going to be the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" item #C25VR. This hitch receiver mounts behind your rear bumper bar instead of below your…

There are some differences to consider between the etrailer hitches #e55ZR and #e35ZR. While both of these hitches have a maximum gross towing weight capacity of 5,000 pounds, they have different maximum tongue weight capacities. The #e55ZR has a…

We currently offer several different hitches for the 2022 Subaru Ascent. Two that are concealed that will be hidden behind the removable panel on the bumper when not in use, and two that sit below the rear bumper and will be fully visible from the…

The Curt Trailer Hitch Receiver part #C25VR is the same as a U-Hual Trailer Hitch Receiver part CMF13448 and they are both fits for a 2020 Subaru Ascent.

The Curt #C25VR and Draw-Tite #76253 will actually be very similar to each other. Both will install the same way and will be completely hidden once completed due to the removable panel on the bumper fascia. However, there are a few differences. The…

The Curt Trailer Hitch Receiver 2" part #C25VR is a fit for the 2020 Subaru Ascent. The Curt hitch is hidden behind the removable fascia panel at the rear the Subaru. When the hitch is not in use the panel can be replaced for a completely hidden…