Trailer Hub Recommendation with Bearings LM11949 and LM67048

Question

Question:

i need a hub .. i have inner bearing lm 67048.. the outter bearing is lm 11949.. it is on hay bale caddy.....wheels are 4 lug on 4.5. Cant find those wheels anywhere so would need 5 lug I guess...thanks

asked by: Jay B

1

Helpful Expert Reply:

The trailer hub part # DX22XR uses both bearing numbers you mentions of LM67048 and LM11949 and has a bolt pattern of 5 on 4-1/2 inch so it will fit. The bolt pattern would be different though so you'd need to find a new wheel and tire.

I attached a link to a page that has all of the wheel and tires we offer that have that bolt pattern.

expert reply by: Jameson C

1

Answer 1

The Trailer Hub Assembly #DX22XR referenced in your question is a relatively unique hub that is typically used in military applications. It is designed for 2,500 pound axles that feature spindles/studs that accept an inner bearing with a 1.250 inch…

view full answer...

Answer 2

We currently only have one hub for your application with the bearings you mentioned. It is the Trailer Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Cast #DX22XR. We do not have any EZ lube grease caps compatible with the covers of this hub, but…

view full answer...

Answer 3

I have some possible solutions for your application, but the Trailer Axle with Idler Hubs #e25GR that you were looking at has the 60" long hub face length you're needing but the spring center distance is 48" which is a bit longer than…

view full answer...

Answer 4

Here is a list of the Agricultural Spindles we currently carry. Spindle #TRU34FR Spindle #TRU54FR Spindle #TRU67FR We also have the #42 Spindle #TRU57FR which has the 2.25" that may be what you are needing. This is a very common size that may…

view full answer...

Answer 5

You didn't mention the total weight of the trailer, just the 3,000 lb carrying capacity so I can only assume the weight of the rest of the trailer will be quite a bit more. So go with Agricultural Spindle for 6,000-lb Trailer Axles #TRU67FR. The…

view full answer...

Answer 6

While we have an option for you, the Agricultural Spindle #TRU54FR uses uncommon bearings, so there isn't a hub for it with a 5 on 5-1/2" bolt pattern, just the 4 on 5" Trailer Hub Assembly #AH15450ECOMP. What you can use instead is a…

view full answer...

Answer 7

The Agricultural Trailer Hub Assembly #AH15450ECOMP is what you are looking for. It uses a Inner Bearing #LM67048 which has an inner diameter of 1.250" and an Outer Bearing #LM11949 with an inner diameter of .750". You can verify that the…

view full answer...

Answer 8

A bearing with a 0.75" inner diameter is LM11949 and a bearing with a 1.25" inner diameter is LM67048, and we don't have a hub with a 6 on 5-1/2" bolt pattern. For a hub with a LM11949 outer bearing and LM67048 inner bearing, the…

view full answer...

Answer 9

It sounds like you have an agricultural hub like the part #TRU54FR that has a diameter of .75 where the inner bearing rides. You will need to measure the spindle of your trailer to verify this. Where the outer bearing rides will need to be 1.25…

view full answer...

Answer 10

The hub part #DX22XR matches the bearing numbers of your old hub so they will fit and work well.

view full answer...

Answer 11

The only trailer hub with a 5 on 4-1/2" bolt pattern, and inner bearing with a 1.250" inner diameter (bearing LM67048) and outer bearing with a 0.750" inner diameter (bearing LM11949) is the following from Dexter: - Dexter Trailer…

view full answer...

Answer 12

We have a hub that fits your spindle but the bolt pattern is different. The part #DX22XR matches your bearing numbers but it's bolt pattern is the more common 5 on 4-1/2 inch. You'll have a much easier time finding wheel/tires to fit this hub…

view full answer...