Maximum And Minimum Heights Of CE Smith 11" Bolster Assemblies On 3" Crossmembers
Question:
With 11 inch bunk brackets, what is the minimum and maximum height above the cross members? I need to know this in order to clear the bumpers. Thanks
asked by: Frederick W
Expert Reply:
I took the following measurements for the CE Smith Bolster and Swivel Bracket Assemblies # CE10001G-4 and the CE Smith U-Bolts # CE15283GA-4 that would fit a 3" crossmember.
From the top of the swivel bracket to the inside of the U-bolt(top of crossemember) at its highest point it is 5-7/8".
From the top of the swivel bracket to the inside of the U-bolt(top of crossemember) at its lowest point it is 3-1/2".
You will need to add in the height of your Bunk Boards # CE27840 and/or Roller Bunks # DL21755 that you intend to mount on your trailer.
Products Referenced in This Question
CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 4
- Boat Trailer Parts
- U-Bolts
- 3-1/16 Inch Wide
- 1/2 Inch Diameter
- Galvanized Steel
- 3-13/16 Inch Long
- CE Smith
more information >
CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long - 1 Pair
- Boat Trailer Parts
- Bunks
- Bunk Boards
- 3-3/4 Inch Tall
- 1-3/4 Inch Wide
- 72 Inch Long
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 11" - Qty 4
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- Swivel Bracket
- 10 Inch Tall
- 2 Inch Tall
- 1-3/8 Inch Wide
- 2-1/2 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
Continue Researching
- Shop: CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies - Galvanized - 12-1/4" - Qty 4
- Search Results: swivel bolster bracket
- Search Results: safety cables
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 11" - Qty 4
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 13" - Qty 4
- Shop: CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 8
- Search Results: bow roller bracket
- Search Results: bolster brackets
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10001G-4 Review
- Video: CE Smith Boat Trailer Carpeted Bunk Boards Review and Installation
- Shop: Ladder Rack
- Shop: Tonneau Cover
- Shop: Yates V Keel Roller for Boat Trailers - Super-Heavy-Duty Rubber - 5" Long - 5/8" Shaft
- Search Results: bunk cover
- Q&A: What is the Difference Between a Bolster Bracket and a Bunk Bracket
- Q&A: Determining Length of Bolster Bracket for New Bunk System on Boat Trailer
- Q&A: How Does the CE Pyramid Washer # CE10806 Fit Against a U-Bolt Nut
- Q&A: Distance from Top of Mounting Bracket to U-Bolt Mounting Hole on # CE10192GA-4
- Q&A: How High Will CE Smith 13 Inch Bolster Bracket Sit Above 3 Inch Crossmember
- Q&A: U bolts Recommendation for Use with the CE Smith U-Bolt Bolster # CE10192GA-4
- Shop: CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 4
- Search Results: keel roller bracket
- Search Results: keel roller pin
- Q&A: What Brackets Needed to Install Bunks on Boat Trailer
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class