Replacement L-Pins For 1000/10000lb Equal-i-zer Weight Distribution Hitch

Question

Question:

i have a equalizer hitch model #90-oo min 1000lbs to 10000lbs which L shape #should i order

asked by: Reese E

0

Expert Reply:

We have just what you are looking for!

For your Equal-i-zer weight distribution hitch rated for 1000lbs tongue weight and 10000lbs trailer weight you need the Replacement L-Pins and Clips for Equal-i-zer Weight Distribution Systems - 6K to 14k - Qty 2 # EQ95-01-9430.

I included a video of the # EQ95-01-9430 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

I reached out to my contact at Progress Mfg. about your question. They do not have a longer lever bar and they do not recommend using what I would call a "cheater bar" to extend that bar for greater leverage. They suggested that…

view full answer...

Answer 2

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 3

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 4

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I went out to our warehouse and measured the Replacement L-Pin for Equal-i-zer 4,000-lb Weight Distribution Systems #90-03-9460. The length of the long side is 2-1/2" long, the short side measured at 1-1/2" long and the thickness of the pin…

view full answer...

Answer 7

It sounds like you're looking for the spring bar retention bracket for your Reese Pro Round Bar Weight Distribution #RE94FR. The correct replacement is the Replacement Spring Bar Retention Bracket Kit #RP58498.

view full answer...

Answer 8

The L-pins on the Fastway e2 systems are a little different than those used with the Equal-I-zer system but #EQ95-01-9430 can be used. For the e2 system we also have replacement L-Pin #FA92-03-9205. The clip is #FA92-04-9208. Each of these are sold…

view full answer...

Answer 9

I can definitely make a list of all the best parts so you can flat tow your 2021 GMC Canyon Denali behind your motorhome. While we don't have any Blue Ox fits at this time (February 2021) we have the Roadmaster Direct Connect base plates which…

view full answer...

Answer 10

The Jensen RV Stereo AWM965 is not Bluetooth compatible nor am I aware of any adapter that would give the device this feature. Therefore, the best option would be to upgrade with the Jensen RV Stereo part #JWM60A. The Jensen JWM60A like the Jensen…

view full answer...

Answer 11

Installing a brake controller on your 1989 Chevy Silverado pickup is pretty straight forward. To start, you will need all of the parts for the complete installation of a trailer connector and the brake controller. The parts needed are a 4-Way trailer…

view full answer...

Answer 12

If the lift motor will no longer operate with the controller but does when you apply direct 12 volt power then that tells me there is an issues with the control board. The only way to replace the control board on the Fan-Tastic Vent Roof Vent part…

view full answer...