Replacement Spring Bar Retention Bracket for Reese Pro Round Bar Weight Distribution Hitch

Question

Question:

I am trying to find the part that goes to the bar that has the cotter key. to keep the bar from sliding off

asked by: Kenny

0

Expert Reply:

It sounds like you're looking for the spring bar retention bracket for your Reese Pro Round Bar Weight Distribution # RE94FR. The correct replacement is the Replacement Spring Bar Retention Bracket Kit # RP58498.

expert reply by: Robin H

0

Answer 1

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

view full answer...

Answer 2

It sounds like you're looking for the spring bar retention bracket for your Reese Pro Round Bar Weight Distribution #RE94FR. The correct replacement is the Replacement Spring Bar Retention Bracket Kit #RP58498.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The vast majority of trailers on the market use a standard coupler (installed on top of the trailer frame) which is compatible with the B&W Continuum Weight Distribution System w/ Sway Control #BW28FR. Underslung couplers aren't as common but…

view full answer...

Answer 6

Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part #19286, will use a 1-7/8 inch socket. A…

view full answer...

Answer 7

Thanks for reaching out, Scott! The Blue Ox Base Plate Kit #BLU74FR on our site is actually the same thing as the Blue Ox part number BX2418 and I like that removable pin style much more than the etrailer Classic Base Plate Kit #e98945 with the fixed…

view full answer...

Answer 8

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

The L-brackets of the Reese weight distribution system #RE44FR need to install between 24.5 and 27.5 inches from the hitch ball center. I attached a picture that I took from the instructions that shows this. The range gives you a bit of flexibility…

view full answer...

Answer 11

Hey there Stormy, I think we can figure this out, as there are a quite a few options. First, let's just discount the heavy-duty rack, as those are just oddly shaped crossbars and there's nothing HD about them (like you mentioned, they have…

view full answer...

Answer 12

There are a few different ReCurve R3 weight rating options available so I don't know exactly what system you have and if it's properly rated for your trailer with just that info. Your old trailer was rated to weigh up to 4,400 lbs and your…

view full answer...

Replacement Spring Bar Retention Bracket for Reese Pro Round Bar Weight Distribution Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching