How To Determine Fit of the Taylor Made PVC Sealing Foam for Boat Windshields

Question

Question:

Will this replace the windshield vent seal on our 1998 SeaRay 330 Express Cruiser? The current seal is dry and starting to crumble.

asked by: Jeff L

0

Expert Reply:

The Taylor Made PVC Sealing Foam for Boat Windshields part # 3691631 is a universal seal used to help cover up the exterior of a boat windshield. This can be used to cover worn and deteriorating seals, replace worn and deteriorating seals or to simply help protect new ones. In order to confirm compatibility you'll simply need to record the dimensions of the seal which are 8' long x 1-1/4" wide x 5/8" thick and make sure this will work for your application.

expert reply by: Conner L

0

Answer 1

Yes, the Taylor Made PVC Sealing Foam #3691631 is the correct size for the windshield of your 1999 Sea Ray DA.

view full answer...

Answer 2

Since the foam you have now is 1-1/4 inch wide the correct replacement is the #3691631 you referenced. This is 5/8 inch thick which would be the correct thickness based on what yours is now after years of shrinking and compression.

view full answer...

Answer 3

It is very likely to work, though there are no specific fits for the Taylor Made PVC Sealing Foam for Boat Windshields #3691631. In order to determine if it will work you will just want to measure the gap where it will fit, and compare that to the…

view full answer...

Answer 4

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 5

A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…

view full answer...

Answer 6

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 7

We do have a compatible grease seal for your 168255TC oil seal, however, we do not carry rubber coated seals in this size. The 168255TC oil seal was designed to work with oil bath hubs on a 3,500 lb axle. For the most part, axle manufacturers have…

view full answer...

Answer 8

From the looks of the photo you sent it does not look like you have an OEM suspension system on your boat trailer. I recommend securing the suspension rail to the trailer frame in a more secure manner like drilling and using bolts so that it does not…

view full answer...

Answer 9

The UFP H-1377 correlates to a Dexter #84 spindle, which is for a 3,500 pound axle. This will utilize an inner bearing #L68149 and an outer bearing #L44649. As this is being used on a boat trailer, I highly suggest going with the etrailer.com…

view full answer...

Answer 10

For your 4x6 utility trailer, I recommend using the Taskmaster 4.80R12 Radial Trailer Tire part #TT48012C. This tire has a radial ply construction which will be better for the longer highway trips you intended to make. It has a load range C rating…

view full answer...

Answer 11

Basically, a free backing brake assembly like #T4423400, will have one shoe that is shorter than the other and the bracket will be a different shape. On a regular assembly, the shoes will by mirror images of each other. Also, on a free backing…

view full answer...

Answer 12

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

How To Determine Fit of the Taylor Made PVC Sealing Foam for Boat Windshields

Product Page this Question was Asked From

Continue Researching