Trailer Hitch Receiver Compatability for 2020 Jeep Cherokee Trailhawk

Question

Question:

Will this fit on a 2020 Jeep trailhawk?

asked by: D

0

Expert Reply:

The Curt Trailer Hitch Receiver # C13395 will fit your 2020 Jeep Cherokee Trailhawk. Be sure to check the instructions linked below for the specific bolts that need to be removed and reused that are specific to the Trailhawk.

If you are planning on towing you will also need a wiring harness item # C56406 and a ball mount kit item # C45534.

I recommend a Mounting Bracket # 18144 to secure the harness on the rear of your Jeep.

expert reply by: Bud M

0

Answer 1

For your 2019 Jeep Cherokee I recommend the Curt Trailer Hitch Receiver #C13395 because of its hidden crosstube design, higher weight capacities, and the fact that it is made right here in the USA. It will provide you with a 2 inch receiver and will…

view full answer...

Answer 2

We have a light kit that was specifically designed for situations like yours with the Curt Auxiliary Light Kit part #C53201 which will stick on either of your racks and connect to the 4-way part #C56040.

view full answer...

Answer 3

Yes, the Curt Trailer Hitch Receiver #C12169 has a 1-1/4" receiver for your bike rack. This is confirmed to fit all models of your 2022 Honda CR-V except the Touring trim levels. I believe this is the same one you found as it does say excluding…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...