Recommended Trailer Hitch for 2019 Jeep Cherokee

Question

Question:

Hello. I have a 2019 Jeep Cherokee and just wondering what you recommend for a hitch?

asked by: Jeff

0

Expert Reply:

For your 2019 Jeep Cherokee I recommend the Curt Trailer Hitch Receiver # C13395 because of its hidden crosstube design, higher weight capacities, and the fact that it is made right here in the USA. It will provide you with a 2 inch receiver and will use existing holes in the Jeep's frame for a no-drill installation. The Class III hitch features a 4,500 pound towing weight capacity and a 675 pound tongue weight limit.

I have attached the written installation instructions that you can take a look at as well.

expert reply by: Chris R

0

click to enlarge

Answer 1

The Curt Trailer Hitch Receiver #C13395 will fit your 2020 Jeep Cherokee Trailhawk. Be sure to check the instructions linked below for the specific bolts that need to be removed and reused that are specific to the Trailhawk. If you are planning on…

view full answer...

Answer 2

The Curt Trailer Hitch Receiver part #C13395 is what I recommend for a 2021 Jeep Cherokee. It is a custom bolt-on option with no drilling required. It has a hidden design which means the cross tube is hidden and the only part shown is the receiver…

view full answer...

Answer 3

The hitch I recommend for your 2020 Jeep Cherokee Latitude is the mostly hidden etrailer #e73ZR. Once this hitch is installed the only thing visible will be the hitch opening hanging below the rear bumper. See attached picture. I also attached an…

view full answer...

Answer 4

The Curt Class I hitch #C11527 is rated for 200 lb tongue weight and 2,000 lbs towing, most small utility/motorcycle trailers and one dirt bike would be less than this max range; please reference your trailer and motorcycles weight for an accurate…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...