Does Curt Hitch # C15410 Fit 2000 Ford F-250 7.3L

Question

Question:

Hello - I would like to update and upgrade my OEM receiver with a new receiver/hitch. I been looking at Curt and reading up on their reviews. Item # C15410 I have a few questions: 1. Is this a direct fit for the 2000 F250? I understand I will need to the spare tire, but will I need to the tank?

asked by: AJ W

0

Expert Reply:

The Curt hitch part # C15410 does fit your 2000 Ford F-250. You do not need to drop your fuel tank to install this either.

expert reply by: Jameson C

0

Answer 1

That is correct. As long as you make sure the functions match you won't have a problem. For example, a connector like the #H20043 uses a red wire for the left turn/stop which follows the RV Standard. To connect to the traditional SAE you would…

view full answer...

Answer 2

Utility beds make things complicated. I wish we had a hitch that would fit but it could potentially interfere with your utility bed so best option would be to contact manufacturer of the utility bed and see what they recommend.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Does Curt Hitch # C15410 Fit 2000 Ford F-250 7.3L

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching