Recommended Hitch for a 2021 Toyota Corolla Hatchback Hybrid

Question

Question:

a 2021 Toyota Corolla hitch, on your product?

asked by: Chris

0

Expert Reply:

For your 2021 Toyota Corolla Hatchback Hybrid, you will want to use the Curt # C11567.

This will fit all models of the Corolla Hatchbacks.

expert reply by: Lazer S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…

view full answer...

Answer 4

Either the Kuat Tranfer 1 #KU64FR or the RockyMounts MonoRail Solo 1 #RKY10007 would handle the bikes you describe easily. Both would hold the bikes by the tires, so the fact that the rack won't come into contact with the frame will work well…

view full answer...

Answer 5

You could leave off installing the outside wheel clamp of the RockyMounts WestSlope bike rack part #RKY10222 but you can't shorten the frame of the rack where the wheel mounts are. For a bike rack with a smaller footprint that can carry up to two…

view full answer...

Answer 6

We do not offer wishbone wiring that has a ground wire going down both sides. You really don't need it because the ground wire is for the plug itself not the lights and you want the ground close to the plug. I recommend using the 4-Way Wishbone…

view full answer...

Answer 7

It sounds like you have a wishbone wiring harness install on your trailer. A regular 4-way wiring harness has 4 wires from the back of the connector, 1 for left turn/brake typically (yellow), 1 for the right turn/brake typically (green), 1 for the…

view full answer...

Answer 8

The Curt #C56196 2 to 3 wire taillight converter is exactly what you'll need to split out the turn signal function from the brake lamp circuit. However, keep in mind that the #C56196 is NOT compatible with LED lamps, unfortunately we don't…

view full answer...

Answer 9

Sure thing; the JRV9000R is a double-din stereo so you can replace it with another double din, and for that I recommend the Jensen RV Stereo w/ DVD Player #JWM45. The #JWM45 is a 48 watt stereo that also has the DVD functionality and will fit in the…

view full answer...

Answer 10

To replace your JVR9000 I recommend the Jensen RV Stereo - Double DIN - AUX/USB, Bluetooth #JWM40. It has slightly different dimensions that can be easily fixed using a dash plate. This won't have a monitor to watch your video feeds from so…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

We do offer the Trailer Connector Adapter, #HM47425, which converts a 7-pole round connector to a 7-pole flat connector. This adapter works for tow vehicles with combined taillight wiring, meaning that the turn signals and brake lights run on the…

view full answer...