Has Anyone Heard of the Furrion Vision S camera F0S05TADS Not Getting Signal in 2021 Dodge Ram?

Question

Question:

asked by: Sherry M

0

Expert Reply:

Connectivity between the camera and monitor are achieved wirelessly and are thereby subject to interference from other wireless devices and the metal structure of the truck and trailer. That being said, if you read the customer comments you will find a couple that had signal issues, but the majority report complete satisfaction.

I think you can use this system and also be happy with the performance.

expert reply by: Les D

0

Answer 1

So there are a number of different reasons why the signal is not working with your Furrion Vision S Camera System #FOS05TASF. It's pretty unlikely the unit is defective (though not outside of the realm of possibility) but first there's some…

view full answer...

Answer 2

It sounds like your propane regulator is bad and needs to be replaced. These are not repairable which is why you need to replace yours and it's pretty easy to do. I see you were looking at a dual stage regulator so if that is what you have then…

view full answer...

Answer 3

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 4

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 5

There is a Titan hitch extender that should work for you, but would require a Titan hitch be installed on your truck to handle a tongue weight loaded that far from the hitch. It is Reese part #RP45292. You can use it as a 34 inch extension or cut it…

view full answer...

Answer 6

You can use a 7-Way and 4-Way connector at the same time just as long as you are not overloading the light circuits. If your camper has a lot of outside lights like running lights, and brake/stop/turn lights then the lights that perform the same…

view full answer...

Answer 7

The longest extension available that will work with the factory trailer hitch receiver on your 2019 Chevrolet Silverado 1500 is the Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long #HE18. You will need to measure from the center…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...