What Hardware is Required to Mount Yakima HD Crossbars to Yakima Overhaul HD Ladder Uprights?

Question

Question:

Good Morning, What hardware is required to mount the Yakima HD Crossbars Y01158 to the Yakima Overhaul HD Adjustable Truck Bed Ladder Uprights Y01151?

asked by: Joe

0

Expert Reply:

I confirmed with my contact at Yakima that there is no extra hardware needed to attach the Yakima HD Crossbars # Y01158 to the Yakima Overhaul HD Adjustable Bed Ladder Uprights # Y01151.

expert reply by: Bob C

0

Answer 1

The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover #Y01151-5755 includes the brackets, uprights, and bars, to install the OverHaul HD on the rails of your truck bed. These parts are for the installation of the ladder rack and…

view full answer...

Answer 2

Yes, you could install the front load bar of the Yakima OverHaul HD part #Y01151-57 behind your tool box if you wanted to.

view full answer...

Answer 3

There is a ladder rack that will work great with the Retrax PRO XR Hard Tonneau #RTT-80383 on your 2020 Ford F-250 6-3/4' Bed to carry your 17' Canoe. I highly recommend the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for…

view full answer...

Answer 4

The screws are M6 x 16, and have a diameter of 6 mm for the Adapter Kit for Rhino-Rack RTL600 Legs - Yakima Tracks. This kit is available with a quantity of either 6 or 12 channel nut adapters, which will allow you to mount 2 or 4 legs: - Quantity of…

view full answer...

Answer 5

The Yakima HD Crossbars like part #Y01158 use standard dimension top channels so you can use channel mounted accessories from pretty much any brand such as Yakima, Thule, Rhino-Rack Etc. without issue. That said, the channel hardware will be specific…

view full answer...

Answer 6

If you are looking for crossbars that can accommodate the 12mm T-slots, the closest confirmed top channels we have are Yakima crossbars like the Yakima HD Crossbars - Aluminum - Black - 68" #Y01158 or Rhino-Rack crossbars like the Rhino-Rack…

view full answer...

Answer 7

I was unable to obtain a detailed drawing of the Quick Fist Original Clamps #QF10010 and Mini Clamps #QF30050 referenced in your question, but I am able to provide you with some measurements and instructions that may help with your application.…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 10

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

What Hardware is Required to Mount Yakima HD Crossbars to Yakima Overhaul HD Ladder Uprights?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching