Recommended Stabilizer Jacks for Leveling a Trailer

Question

Question:

ultra-fab 39-941705. I have a wolfpack 365pack16 the stabilizer on the trailer are psx1 they dont lift at all will these lift to help level or will they run out of power when they touch the ground

asked by: Stephen B

0

Expert Reply:

The Ultra-Fab Stabilizer # UF39-941705, though technically not designed to lift the trailer, per se, will still provide some lift when leveling the trailer out. That being said, these are rated to 6,000 pounds of leveling lift, but as a general rule, this style of stabilizer should not be used to lift a trailer to the point of changing a tire or something to that affect.

expert reply by: Lazer S

0

Answer 1

The Ultra-Fab Power Twin II Electric Stabilizer, part #UF39-941705 features dual motors and is capable of lifting up to 6,000 lbs with either side. You said you are parked on a very uneven site. My contact at Ultra-Fab said that this system can lift…

view full answer...

Answer 2

The Ultra Fab Leveler jacks part #UF39-941705 are designed for exactly what you are looking to do. To level and stabilizer your trailer. First you want to be on as level of ground as possible. Then use the jack at the front of the trailer to level it…

view full answer...

Answer 3

We get this question occasionally and the answer is they are not designed for lifting so we can't recommend you do so. That being said we are aware some people go ahead and do so for spare tire changing etc. They might get away with in in the…

view full answer...

Answer 4

The best stabilizer jack recommendation I can make is the part #UF39-941705 because of the trailer frame widths it fits (48" to 80" wide), it's capacity of 6,000 lbs and the fact it just works very well. It would be your best option for…

view full answer...

Answer 5

Typically stabilizer jacks and leveling jacks are the same thing. The Ultra Fab part #UF39-941705 can do both as well. It can lift up to 30 inches from where the jacks are mounted on the trailer. When the jacks are at their max height they have a…

view full answer...

Answer 6

The Ultra Fab kit part #UF39-941705 would be a great option. This attaches to the bottom of the frame of your camper and allows you to independently control to jack legs on either side of the trailer to level and stabilize it. I attached a review…

view full answer...

Answer 7

Since you are at 22 inches it would not hurt to go with the taller model #UF39-941705 especially since you never know the type of terrain you might be in. I have included a link to a video review of this jack for you.

view full answer...

Answer 8

You'll be able to connect your Weber Traveler Grill directly to that quick-disconnect fitting using a hose like the MB Sturgis #100476-120-MBS as long as your grill doesn't have a regulator. If it does have a regulator then you need a tee…

view full answer...

Answer 9

Typically the switches of the Ultra-Fab Power Twin II Electric Stabilizer #UF39-941705 that you referenced gets mounted to the trailer frame. UF prefers if you can mount them in a storage bin or somewhere else that's at least slightly…

view full answer...

Answer 10

I can tell you how to wire the motors of the Ultra-Fab Power Twin II Electric Stabilizer #UF39-941705, but the manufacturer doesn't provide a diagram, just the written instructions, which are pretty simple to follow. You'll need to wire the…

view full answer...

Answer 11

Technically yes but you would only have 6,000 at the front and 6,000 at the rear using 2 sets of the Power Twin stabilizer, #UF39-941705. Often the back of the trailer is heavier so you would have to make sure that the weight at either point does not…

view full answer...

Answer 12

There's guide out there to tell me exactly what stabilizer you have on your Fleetwood Wilderness GLX so I would need to know the exact system before I could give you the correct steps. Typically there will be a manual override spot on the head of…

view full answer...