Confirmation of Proper Wheel Well Height for Older Pro Series Weight Distribution System
Question:
bought hitch from etrailer 5-6 yrs ago local RV service manager helped install initially since he has passed rebuilt tow vehicle need advise if i have gotten close to correct adjustments pictures and measurements i will try to send photos thanks
asked by: Lewis Y
Helpful Expert Reply:
According to the installation instructions for the Pro Series 49902, once the weight distribution system is installed and properly set up, the front wheel well or fender height should be equal or less than what it was before the trailer was hitched up and the weight distribution system spring bars were hooked up. Since your 'after' wheel well or fender height was 1/8 of an inch less than what it was before and you've only settled 3/4 of an inch at the rear fender, I'd say you've got it perfectly dialed in. Well done, Sir!
Thanks for the cool photo of the vehicle and the photo showing all your measurements, that was a huge help!
I've linked to some help articles about weight distribution that you might find useful.
Product Page this Question was Asked From
Curt MV Weight Distribution System - Round Bar - 14,000 lbs GTW, 1,400 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- 1100 lbs
- 1200 lbs
- 1300 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: weight distribution hitch
- Shop: Reese Pro Round Bar Weight Distribution w Sway Control - Round Bar - 11,500 lbs GTW, 1,150 lbs TW
- Shop: Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 14K GTW, 1.4K TW
- Shop: Suspension Enhancement
- Shop: Curt MV Weight Distribution System - Round Bar - 14,000 lbs GTW, 1,400 lbs TW
- Shop: Brake Controller
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW
- Search Results: wdh
- Shop: Trailer Hitch
- Shop: Performance Chip Tuners
- Video: Trailer Brake Controller Installation - 2012 Chevrolet Silverado 90195
- Shop: Curt MV Weight Distribution System - Round Bar - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Edge Insight CS2 Comprehensive Gauge Display - Color Screen
- Shop: Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle
- Q&A: Troubleshooting Blank Screen on Tekonsha Prodigy P3 Brake Controller
- Q&A: No Power On Brake Light Circuit When Installing a Brake Controller
- Q&A: Does the P3 Brake Controller Have to Be Connected to a Trailer to Display Voltage
- Q&A: Troubleshooting Trailer Brake Controller Won't Turn On When Wired to GMC Sierra
- Q&A: Curt Short-Arm VS Regular Weight Distribution System Spring Bar Length
- Q&A: Can Bolt-Mounted Chain Hangers be Installed Through Aluminum Trailer Frame
- Q&A: Distance from Ball to End of Chain Bracket on Curt Short Arm Weight Distribution System # C17333
- Video: Review of CURT Weight Distribution Hitch - MV 14K Weight Distribution System - C17057
- Search Results: weight distribution
- Search Results: brake controller
- Search Results: 83660
- Article: 5 Things to Know About Weight Distribution Hitches
- Search Results: 88288
- Search Results: cooler
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Brake Controller