Troubleshooting Trailer Brake Controller Won't Turn On When Wired to GMC Sierra
Question:
Hi I installed the wiring harness that came with my 2016 GMC Sierra for the trailer brakes. I wired it to a Draw-Tite electronic brake controller. Model number is 20191. It won’t turn on at all. It seems to be wired correctly. Is there anything else I need to do or is in possibly not compatible??
asked by: Russell S
Expert Reply:
The Draw-Tite I-Stop IQ model 20191 Brake Controller is an older model but it should be compatible with the factory harness on your 2016 GMC Sierra.
If the unit isn't powering on at all when wired to the truck then there might be a blown or missing fuse under the hood. I took a look at the online owner's manual for your Sierra and it states that the fuse for the factory brake controller harness should be located at the number 1 position inside the engine compartment fuse block located on the driver side of the truck.
Check to make sure this fuse is present and in good condition, replacing as needed.
If this does not resolve the issue please let me know and we can continue to troubleshoot.
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: weight distribution hitch
- Shop: Reese Pro Round Bar Weight Distribution w Sway Control - Round Bar - 11,500 lbs GTW, 1,150 lbs TW
- Shop: Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 14K GTW, 1.4K TW
- Shop: Brake Controller
- Shop: Curt MV Weight Distribution System - Round Bar - 14,000 lbs GTW, 1,400 lbs TW
- Video: Trailer Brake Controller Installation - 2012 Chevrolet Silverado 90195
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: wdh
- Shop: Performance Chip Tuners
- Shop: Trailer Hitch
- Shop: Suspension Enhancement
- Shop: Superchips Flashpaq F5 Performance Tuner - California Approved - Gas/Diesel
- Shop: Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW
- Q&A: Does the P3 Brake Controller Have to Be Connected to a Trailer to Display Voltage
- Q&A: Troubleshooting Blank Screen on Tekonsha Prodigy P3 Brake Controller
- Q&A: No Power On Brake Light Circuit When Installing a Brake Controller
- Q&A: Can a Curt Weight Distribution System be Used on a Trailer with I-Beam Frame
- Q&A: Can Bolt-Mounted Chain Hangers be Installed Through Aluminum Trailer Frame
- Q&A: Curt Short-Arm VS Regular Weight Distribution System Spring Bar Length
- Q&A: Distance from Ball to End of Chain Bracket on Curt Short Arm Weight Distribution System # C17333
- Search Results: trailer brake controller
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Review
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Brake Controller
- Shop: Trailer Wiring
- Article: 5 Things to Know About Weight Distribution Hitches
- Video: Review of Reese Weight Distribution - WD Only - RE44FR
- Search Results: brake controller
- Article: Trailer Wiring Diagrams
on Trailer Brake Controller
