Can You Replace Air Inflated Tires on Trailer Valet Trailer Dolly With Solid Rubber?

Question

Question:

Can I replace the tires of my trailer valet with the solid rubber tires. I use it to move my 17 ft caper trailer. The description says up to 500 lbs load limit for the tires.

asked by: Bruc

0

Expert Reply:

If your Trailer Valet Trailer Dolly came with the pneumatic tires you will unfortunately not be able to replace them with solid rubber tires # TVXLSR and attempting to do so would void the warranty on your dolly.

If your tires are in need of replacement you would need to use the Replacement Tire for Trailer Valet Swivel Jack and Trailer Mover # TVTR and tube # TVIT.

If you are needing a dolly with a higher weight capacity I recommend the Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 10,000 lbs GTW # TVXL2 which has the solid rubber tires and a 1000lb tongue weight rating.

expert reply by: Samuel C

0

Answer 1

The replacement parts you need will be the pneumatic Trailer Valet Tire, #TVTR & the Replacement Inner Tire, #TVIT. Unfortunately, the newer Solid Rubber Tire, #TVXLSR will not work on the Trailer Valet versions that use pneumatic tires.

view full answer...

Answer 2

I reached out to Trailer Valet to get an answer for you, and they told me that the older Trailer Valet XL cannot swap out its pneumatic tires with the Replacement Solid Rubber Tire #TVXLSR. They went on to say that attempting to do this would remove…

view full answer...

Answer 3

Yes, the Trailer Valet XL Trailer Dolly #TVXL25 does come with solid rubber tires. We carry the replacements here with part #TVXLSR if you ever need to replace one, but Trailer Valet did upgrade from the pneumatic tires for this superior design.

view full answer...

Answer 4

view full answer...

Answer 5

We have solid rubber replacement tires for the Trailer Valet available. The Replacement Solid Rubber Tire for Trailer Valet Trailer Mover #TVXLSR will fit Trailer Valet trailer dolly models XL, XL Pro, MV, TVXL25, TVXL2, and TVXLV2. This includes (1)…

view full answer...

Answer 6

The Trailer Valet that the Replacement Solid Rubber Tire for Trailer Valet Trailer Mover #TVXLSR can not be used on your Trailer Valet 5X Swivel Jack and Trailer Mover #STC-V211 as confirmed by Trailer Valet, due to the fact that the original hubs on…

view full answer...

Answer 7

The Trailer Valet XL Trailer Dolly part #TVXL25 that you referenced uses a solid rubber tire, part #TVXLSR so there would be no inflation valve to add air. However, I think you might have the Trailer Valet 5X Swivel Jack and Trailer Mover part…

view full answer...

Answer 8

The Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball #TVXL25 actually has a 10,000 lb trailer weight capacity and 1,000 lb tongue weight capacity. It is very likely that your 20 foot travel trailer will have a weight that is…

view full answer...

Answer 9

If I had to guess the valve stem is bad and if you put pressure on it leaks. What you'd want to do is replace the inner tube with the part #TVIT.

view full answer...

Answer 10

The tire part #TVTR that you referenced is a Load Range B tire in the size of 2.80/2.50-4 which means it does have a 250 lb per tire capacity. The Trailer Valet that this is used on is the #STC-V211 which has a 500 lb capacity total. The Trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...