Replacement Tire Capacity for Trailer Valet Trailer Dollies

Question

Question:

This would be a replacement on my trailer valet XL. Your rating states 250lbs. Original tires rating is. 500lbs. Can you please help with discrepancy.

asked by: Mark

0

Expert Reply:

The tire part # TVTR that you referenced is a Load Range B tire in the size of 2.80/2.50-4 which means it does have a 250 lb per tire capacity. The Trailer Valet that this is used on is the # STC-V211 which has a 500 lb capacity total.

The Trailer Valet XL # TVXL25 that you have actually uses the tire part # TVXLSR which does have a 500 lb capacity per tire.

expert reply by: Jameson C

0

Answer 1

Yes, the Trailer Valet XL Trailer Dolly #TVXL25 does come with solid rubber tires. We carry the replacements here with part #TVXLSR if you ever need to replace one, but Trailer Valet did upgrade from the pneumatic tires for this superior design.

view full answer...

Answer 2

view full answer...

Answer 3

The Trailer Valet XL Trailer Dolly part #TVXL25 that you referenced uses a solid rubber tire, part #TVXLSR so there would be no inflation valve to add air. However, I think you might have the Trailer Valet 5X Swivel Jack and Trailer Mover part…

view full answer...

Answer 4

If your Trailer Valet Trailer Dolly came with the pneumatic tires you will unfortunately not be able to replace them with solid rubber tires #TVXLSR and attempting to do so would void the warranty on your dolly. If your tires are in need of…

view full answer...

Answer 5

I reached out to Trailer Valet to get an answer for you, and they told me that the older Trailer Valet XL cannot swap out its pneumatic tires with the Replacement Solid Rubber Tire #TVXLSR. They went on to say that attempting to do this would remove…

view full answer...

Answer 6

The Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball #TVXL25 actually has a 10,000 lb trailer weight capacity and 1,000 lb tongue weight capacity. It is very likely that your 20 foot travel trailer will have a weight that is…

view full answer...

Answer 7

If I had to guess the valve stem is bad and if you put pressure on it leaks. What you'd want to do is replace the inner tube with the part #TVIT.

view full answer...

Answer 8

I went to the warehouse and checked out the Replacement Drill Attachment for Trailer Valet XL Trailer Dolly, part #TVDA for you. The adapter will work best with 1/2 inch 18V drills. This adapter will work with #TVXL2 and #TVXL25 and also the…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Replacement Tire Capacity for Trailer Valet Trailer Dollies

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching