Replacement Inner Tube for Trailer Valet XL

Question

Question:

I need to replace the inner tube on our trailer valet XL. The tube valve tore when trying to fill with air. The Valet is about 5 years old. Tires are still in excellent condition. Will your inner tube work on the XL. Also would like to consider the replacement tire with no inner tube, does that work on the older XL. Thank you for any information you can provide.

asked by: David

0

Expert Reply:

We offer replacement tires and tubes for the Trailer Valet XL Trailer Dolly, # TVXL2 (2" ball) and # TVXL25 (2 5/16" ball). The replacements are Trailer Valet Tire, # TVTR & the Replacement Inner Tire, # TVIT.

Unfortunately, the newer Solid Rubber Tire, # TVXLSR will not work on the Trailer Valet versions that use pneumatic tires.

expert reply by: Jameson C

0

Answer 1

If your Trailer Valet Trailer Dolly came with the pneumatic tires you will unfortunately not be able to replace them with solid rubber tires #TVXLSR and attempting to do so would void the warranty on your dolly. If your tires are in need of…

view full answer...

Answer 2

I reached out to Trailer Valet to get an answer for you, and they told me that the older Trailer Valet XL cannot swap out its pneumatic tires with the Replacement Solid Rubber Tire #TVXLSR. They went on to say that attempting to do this would remove…

view full answer...

Answer 3

What we have for your Trailer Valet 5x is the part #TVTR for the tire and the part #TVIT for the inner tube. The solid rubber part #TVXLSR will not fit versions that came with air inflated tires.

view full answer...

Answer 4

Yes, the Trailer Valet XL Trailer Dolly #TVXL25 does come with solid rubber tires. We carry the replacements here with part #TVXLSR if you ever need to replace one, but Trailer Valet did upgrade from the pneumatic tires for this superior design.

view full answer...

Answer 5

The tire part #TVTR that you referenced is a Load Range B tire in the size of 2.80/2.50-4 which means it does have a 250 lb per tire capacity. The Trailer Valet that this is used on is the #STC-V211 which has a 500 lb capacity total. The Trailer…

view full answer...

Answer 6

The Trailer Valet XL Trailer Dolly part #TVXL25 that you referenced uses a solid rubber tire, part #TVXLSR so there would be no inflation valve to add air. However, I think you might have the Trailer Valet 5X Swivel Jack and Trailer Mover part…

view full answer...

Answer 7

For your Trailer Valet 5x the correct replacement inner tube is the part #TVIT.

view full answer...

Answer 8

We do offer replacement tires for the Trailer Valet XL Trailer Dolly, #TVXL2 (2" ball) and #TVXL25 (2 5/16" ball). The replacements will be the pneumatic Trailer Valet Tire, #TVTR & the Replacement Inner Tire, #TVIT. Unfortunately, the…

view full answer...

Answer 9

If I had to guess the valve stem is bad and if you put pressure on it leaks. What you'd want to do is replace the inner tube with the part #TVIT.

view full answer...

Answer 10

We have solid rubber replacement tires for the Trailer Valet available. The Replacement Solid Rubber Tire for Trailer Valet Trailer Mover #TVXLSR will fit Trailer Valet trailer dolly models XL, XL Pro, MV, TVXL25, TVXL2, and TVXLV2. This includes (1)…

view full answer...

Answer 11

The Trailer Valet that the Replacement Solid Rubber Tire for Trailer Valet Trailer Mover #TVXLSR can not be used on your Trailer Valet 5X Swivel Jack and Trailer Mover #STC-V211 as confirmed by Trailer Valet, due to the fact that the original hubs on…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Inner Tube for Trailer Valet XL

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching