Replacement Tire Solution for Trailer Valet with Pneumatic Tires

Question

Question:

I have a older trailer valet XL with pneumatic tires. I need a replacement tire. What one do I get? Unless I can get the solid non-flat tire.

asked by: Phillip C

0

Expert Reply:

The replacement parts you need will be the pneumatic Trailer Valet Tire, # TVTR & the Replacement Inner Tire, # TVIT.

Unfortunately, the newer Solid Rubber Tire, # TVXLSR will not work on the Trailer Valet versions that use pneumatic tires.

expert reply by: Jameson C

0

Answer 1

If your Trailer Valet Trailer Dolly came with the pneumatic tires you will unfortunately not be able to replace them with solid rubber tires #TVXLSR and attempting to do so would void the warranty on your dolly. If your tires are in need of…

view full answer...

Answer 2

I reached out to Trailer Valet to get an answer for you, and they told me that the older Trailer Valet XL cannot swap out its pneumatic tires with the Replacement Solid Rubber Tire #TVXLSR. They went on to say that attempting to do this would remove…

view full answer...

Answer 3

We have solid rubber replacement tires for the Trailer Valet available. The Replacement Solid Rubber Tire for Trailer Valet Trailer Mover #TVXLSR will fit Trailer Valet trailer dolly models XL, XL Pro, MV, TVXL25, TVXL2, and TVXLV2. This includes (1)…

view full answer...

Answer 4

If I had to guess the valve stem is bad and if you put pressure on it leaks. What you'd want to do is replace the inner tube with the part #TVIT.

view full answer...

Answer 5

The current versions of the Trailer Valet XL part numbers #TVXL25 for a 2-5/16 inch ball or part #TVXL2 for a 2 inch ball both use the solid tire that can't lose air. This is the style of Trailer Valet wheel we now offer for both dollies.

view full answer...

Answer 6

Yes, the Trailer Valet XL Trailer Dolly #TVXL25 does come with solid rubber tires. We carry the replacements here with part #TVXLSR if you ever need to replace one, but Trailer Valet did upgrade from the pneumatic tires for this superior design.

view full answer...

Answer 7

The Trailer Valet that the Replacement Solid Rubber Tire for Trailer Valet Trailer Mover #TVXLSR can not be used on your Trailer Valet 5X Swivel Jack and Trailer Mover #STC-V211 as confirmed by Trailer Valet, due to the fact that the original hubs on…

view full answer...

Answer 8

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Replacement Tire Solution for Trailer Valet with Pneumatic Tires

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching