What is the Difference Between a Curt EZr Double Lock and Standard Double Lock Gooseneck Hitch

Question

Question:

Im looking to purchase a curt gooseneck hitch for a customers 2012 f250 super duty with a 6-3/4 bed. What is the difference between curt c60683 and c60720?

asked by: Steven R

0

Expert Reply:

The Curt EZr Double Lock # C60683 and the Double Lock # C60720 are essentially the same gooseneck system with some minor differences. Mainly, the EZR sits lower by 3/8" in the truck bed, but it's main draw is that it's designed to be a bit easier to install. Both will fit on the 2012 Ford F-250 with 6-3/4 Foot Bed.

I've linked some review and installation videos of the two for you to check out and decide for yourself.

expert reply by: Erik B

0

Answer 1

The Curt Double Lock Gooseneck Hitch part #C60720 and Curt EZr Double Lock Gooseneck Hitch part #C60683 are similar but not the same gooseneck hitch. They are both fits for your 2013 Ford F-250 but the EZr has center locator tool which makes for…

view full answer...

Answer 2

To install the B and W Hitch part #BWGNRK1500 you will need to provide 1/4 thick brace straps to attach the hitch to the frame of the trailer. If you check out the install instructions I attached you can see more about the install process. The…

view full answer...

Answer 3

Since flat beds have a tendency to be a bit longer than standard truck bed I'd recommend putting the B and W Turnoverball #BWGNRK1500 right over the rear axle. Any further forward and you'd be more likely to have clearance issues between the…

view full answer...

Answer 4

I reached out to my contact at B&W and have a solution for you. Although none of the manufacturers we carry have a fit for the 34 inch frame, B&W has a work-around. If you have a flatbed, you can use the #BWGNRK1500 that gets welded to the…

view full answer...

Answer 5

You do have the installation of the U-bolt safety chains correct for the Buyers Products 2-5/16" Fabricators Flatbed Gooseneck Hitch #3375613500. I have cut out and added below the section of the instructions for the #3375613500 which details…

view full answer...

Answer 6

There is not a custom fit gooseneck hitch and underbed rails for your 2000 Ford F-350 Cab and Chassis. Your best option is to use the B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs #BWGNRK1500 which will require…

view full answer...

Answer 7

The dimensions are below for the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1500. Overall dimensions of the plate- 6” X 8” Bottom of the plate to the bottom of the socket Fin (brace) – 2-1/4" Bottom of the plate to the end of…

view full answer...

Answer 8

There is an underbed gooseneck hitch that is going to work with your 2008 Ford F-250 Super Duty, but the Curt Double Lock #C60720 will not be a fit. Instead, I recommend the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1500 which is…

view full answer...

Answer 9

Yes, the Firestone air bag kit #F2703 you have for your 2016 Ford F-250 is compatible with in-bed hitches like the Curt gooseneck part #C60683 that you referenced as well.

view full answer...

Answer 10

If you are having trouble sliding the Curt Double Lock #C60720 rails between the frame and bed of your 2012 Ford F-350, I would not recommend loosening the in-bed bolts; instead, the directions do recommend you cut a notch in the flange on the…

view full answer...

Answer 11

Good morning. Both the #C60720 and the #C60720-5W are the same exact item. We give them different part numbers so that the item can be searched as both a gooseneck hitch and as a mount for the Demco Recon 5th wheel hitch, Both kits include the rails,…

view full answer...

Answer 12

No, you do not have to remove the bed on your 2015 Ford F-250 to install Curt gooseneck trailer hitch #C60720. The only variation of the installation is that on 2011 and newer model trucks the hitch head needs to be rotated when installed so that…

view full answer...