Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The chrome-plated ball on this gooseneck hitch locks in place with 2 pins for extra security. When you're done towing, flip the ball over and store it inside the hitch, freeing up your truck bed. Innovative center locator eases installation.
Features:
Specs:
The Curt EZr Double Lock underbed gooseneck trailer hitch provides a sturdy, secure connection for towing your gooseneck trailer and also allows for a clean, unobtrusive look for your truck bed when you aren't towing. To tow, simply pull the included handle out to unlock the hitch. Then insert the chrome-plated hitch ball into the ball hole. You may need to rotate the ball to line it up with the dual locking pins. When the ball drops into place, rotate the handle counterclockwise until the locking pins snap into position. Because there are 2 locking pins instead of 1, you get extra security for your towing setup.
Get full bed access when you're not towing. Just remove the ball, flip it upside down, drop it back into the ball hole of the hitch, and use the handle to lock the ball in place. A rubber cover is included with the EZr Double Lock. When the ball is stowed upside down in the hitch, place this cover over the ball hole to keep out dirt and grime and create a clean look for your vehicle.
The innovative center locator tool included with this gooseneck trailer hitch is designed to make installation fast and easy by eliminating the need to measure where the ball hole must be cut into your truck bed. Once you have the custom installation kit in place and the gooseneck hitch is properly attached to the rails, the bright orange locator will help you to finish installation.
Use the hole at the center of the locator to line up your 3/16" drill bit, and drill up from beneath the bed to create a pilot hole. This pilot hole will be your guide as you cut the 4" diameter ball hole into your truck bed.
When you begin cutting through your bed, the locator will act as a trim shield, ensuring that you don't drill too deep. Continue cutting from the top of your truck bed until orange shavings appear. Once you see these shavings, you've gone far enough. The center locator can be easily removed from the hitch once installation is complete.
Alternate Instructions
Average Customer Rating: 4.5 out of 5 stars (100 Customer Reviews)
The chrome-plated ball on this gooseneck hitch locks in place with 2 pins for extra security. When you're done towing, flip the ball over and store it inside the hitch, freeing up your truck bed. Innovative center locator eases installation.
Nice clean look. Most importantly didn't have to lower exhaust. centering the hitch in the bed was easy because of the template provided. Although install did take longer than what was noted, it was fairly simple. Would definitely purchase again.
I have had a few different GN hitches over the years and this model is top notch. The installation was straight forward and the drill guide made the location of where to drill effortless. If I had to pick a place where improvement could occur, it would be the resistance of the safety chain loop springs. They ensure rattles don't occur, but getting the chain loop inside can be difficult at times. Overall the construction is very robust. The nice touches such as the rubber cap and the price point make this a great option. I would repeat the purchase.
Install is a little bit of a pain if you plan to DYI without any kind of lift. Has worked great pulling a 30ft 5th wheel.
One of the 2 black carrier spacers is gone #60645-cbs. They were loose in the box with the rails and side plates. One fell out of the torn box. Don't know why those spacers were not put in the plastic bag of hardware. So now can not mount the hitch. Called your office and ordered , But who knows how long that will take. Not very happy with your company.
It didn't slide in as easily as in the video, but I was also working on the ground in a very cramped garage instead of from a lift. Watch the videos on here and it's no issue. The only thing I almost gave up on was the little rubber gasket around the cut. Incredibly difficult to get on but once it makes it all look finished.
Not as handy as a flip up ball but plenty stout. A very good, strong setup for the money. I was able to install w/o taking off the bed which is a big plus
Great hitch. Pretty straightforward to install.
Great product! Easy install!! Arrived on time!
everything fit perfect, took a while to install, but that was expected for a non mechanic.
fit just as it should
Haven't installed yet, but it came quickly...Thank you
Accurate install directions, fantastic fit and operates perfectly for my 5th wheel RV
Seems heavy duty but the brackets hit the u-bolts and spring top plates. Curt told me I must of installed them wrong. I don't think so
After receiving the parts that were missing from the original order, the hitch was finally installed today, it took more then the 3 hours the video implied,
I haven't pulled with it yet, but looking forward to it..
The company was very courteous, very helpful, shipped the missing part promptly.
I will do business with them again.
I installed this hitch on my 2021 Silverado 2500HD. When first looking under the truck it appeared the exhaust would have to be modified to make the unit fit. The fact is this unit went in without any modifications at all…even all the factory drilled holes lined up perfectly. I recommend this hitch to anyone that has a stock exhaust system.
Great hitch and easy to use. I did have to lift up the bed a little bit to install it. Took me about 5 hours because of that but otherwise it is a great hitch. The rings for the safety chains stay on the bed and the ball flips over and stows away completely.
Seems to be very well built. Shipping was very fast. Will definitely purchase other products.
Easy to install. 64 years old and did it all by myself. So glad I went with this style. Have gooseneck and fifth wheel ability. When I want my full bed there’s no rails in the way. Pulling 13,000-14,000 lb fifth wheel camper. No problems.
Installed as easy as they said it would. Videos are very helpful. Works great!
shipping lost a box Men when box arrived 17 was destroed and missing parts. Need to do better job of packing for Shipping. Still waiting for missing parts.
hitch itself fit good, Didn't really like the mounting design though. Kit requires one big bolt and a u bolt "Are supplied" that holds it on truck. Seems it could be made more secure with better designed mounting brackets,but overall kit fit well and is working for what i need.
Have not attempted install yet but looks well made and straight fowrard instructions
Do you have a question about this Gooseneck Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Scott
6/26/2021
Great hitch, working great. Many, many miles on it dragging horses all over the Midwest. Only thing I did was coat locking pins and ball with anti-seize.