Load Range D ST205/75R14 Trailer Tire With Galvanized Steel Wheel & 5 on 4-1/2 Bolt Pattern

Question

Question:

Loadstar AM3S450 Do you not have this combo with a load range D tire?

asked by: Trey G

0

Expert Reply:

We do have a solution for you, though the Loadstar ST205/75D14 Bias Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load Range C # AM3S450 is not available in a load range D because ST205/75-14 bias tires only go up to load range D.

So what you can use instead is a load range D ST205/75-14 radial tire and that same wheel, though you would need to get them separate and have them mounted. Radial tires are definitely the better option for normal road use, because the side-to-side cords in radial tires (compared to bias tires) allow them flex more, run cooler, and have better road traction. So what you can use is the following:

- Karrier ST205/75R14 Radial Trailer Tire - Load Range D # AM10235

- Steel Spoke Trailer Wheel - 14" x 6" Rim - 5 on 4-1/2 - Galvanized Finish # AM20354

- Americana High Pressure Rubber Snap-In Valve Stem # AM20904

Your other option, if you wanted the load range D tire and wheel mounted together, would be a radial ST205/75-14 with an aluminum wheel for even better corrosion protection than a galvanized wheel, and for that you can get the Kenda Karrier ST205/75R14 Radial Tire with 14" Series T09 Aluminum Wheel - 5 on 4-1/2 - LR D # AM34659.

This combo includes the valve stem so you would not need that separately. I have added some links below to video reviews for you to check out as well if you'd like to take a look.

expert reply by: Kyle S

0

Answer 1

Tire designations ST205/75D14 and ST205/75R14 are both for special trailer tires with a 205mm width, 75-percent aspect ratio and that fit a 14-inch wheel. The difference between them is the tire's type of construction. The ST205/75D14 tire is a…

view full answer...

Answer 2

The Loadstar ST205/75D14 Bias Trailer Tire with 14" Galvanized Wheel #AM3S450 that you were looking at all have a manufacturers date within the last 18 months.

view full answer...

Answer 3

Yes, I can confirm that the 24x40 etrailer Cargo Carrier for RV Bumper #e99050 does include the bumper safety struts #MO22FR you're referencing.

view full answer...

Answer 4

Long story short, yes you can. But going with the ST205/75R14 would be a better replacement than a ST205/75D14 because the R in the first size means it is a radial tire whereas the D in the second size means it is a bias ply. The main difference…

view full answer...

Answer 5

I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material. For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs. For a 15 inch steel wheel with 1/2 inch wheel studs…

view full answer...

Answer 6

I was unable to find information on the model EZ Loader Boat Trailer referenced in your question. I recommend checking the sidewalls of your existing tires to see what size is currently mounted. There should be a number listed, like what is on the…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...