Review of Kenda Trailer Tires and Wheels - Tire with Wheel - AM32684 Video

If you are specifically looking for the Kenda Karrier ST225/75R15 Radial Trailer Tire - Load Range E #AM10303, we do have this tire mounted on a 15" White Spoke Wheel - 6 on 5-1/2" #AM32680 and 15" Hi-Spec Aluminum Wheel -…

Hey Michael, the Kenda 5.30-12 Bias Trailer Tire #AM30710 has a K-65 mph sped rating.

If you are talking about flipping your axle so it mounts below your leaf springs then yes! You should definitely take this opportunity to install an axle flip kit. There is no better time then right now. If this is not what you are talking about…

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures…

It is not recommend to jack up a trailer by the axle. This may cause damage to the axle itself. It also puts too much stress on the leaf springs. Instead, you will want to place the jack under part of the trailer frame preferably next to the leaf…

Yes, we do have lug nuts and center caps that will work with the wheel included with tire and wheel combo #AM32684. The recommend lug nuts are either #12CLN or #12CLN-L. They are sold in quantities of 1. Lug nut #12CLN-L will be the easier one to…

For your 28' enclosed trailer I recommend the Furrion Chill HE RV Air Conditioner System - Single Zone - 15,000 Btu - Black #FR23PV. If the ceiling of the trailer isn't too high and you can reach the air distribution box and…

Our tire and wheel assemblies do not come from the manufacturer balanced. This being as it is not as important to have trailer wheels balanced like it is for vehicle tires. Trailer tires main purpose is supporting heavy loads and not providing a…

The Optronics stud-mounted LED Trailer Light Kit, part #TLL9RK, features left- and right-hand LED light assemblies that are DOT-approved and waterproof, and includes a 25-foot wiring harness, mounting hardware and connectors, and a license plate…

If your trailer is more than 80" wide and 37' long then you need 2 rear side marker lights, 2 rear side reflectors, 2 front side marker lights, 2 front side reflectors, 2 intermediate side marker lights and reflectors, as well as 2…

The pilot hole for your wheel will need to be 4-3/4" or more to be used with Dexter Trailer Hub and Drum Assembly #8-219-13UC3. This is a lug-centric hub which uses lug nuts to secure the wheel to the hub and your wheel will need to have an…

Trailer wheel lug nuts that are 1/2-inch inside diameter typically have a 20-TPI thread pitch (20 threads per inch). Most lug nuts also use a 60-degree-coned profile like #CE11051, but a 90-degree like #STN569 is also available for 9/16-inch studs.…