Trailer Hitch Options for a 2002 Mitsubishi Galant To Carry a 2 Inch Bike Rack

Question

Question:

I have a 2002 mitsubishi galant with spoiler and an allen bike rack model 645RR that we use on our chevy blazer, however I want to get a hitch put on my mitsubishi so I can use the rack on the car, however I noticed the hitch that was recommended for my galant was a 1 1/4inch and the bike rack is a 2inch any suggestions? Thank you for your help. Also my husband told me that uhaul might be able to install one.

asked by: Chastity G

0

Expert Reply:

At this time the only trailer hitch available for your 2002 Mitsubishi Galant is the Curt Class I Trailer Hitch, # C11248. As you mentioned, class I trailer hitches only come with a 1-1/4 inch receiver. The best option for you would be to look into a class I compatible bike rack.

There are trailer hitch adapters available that will allow you to use a 2 inch hitch mounted accessory with a 1-1/4 inch hitch, like part # HTAD, but they also reduce the tongue weight capacity of the hitch by half. Which means you will be limited to carrying a maximum of 100 lbs on the trailer hitch. This includes the weight of the bikes and the bike rack.

Also, it is not recommended to carry more than 2 bikes at a time with a class I trailer hitch. Adding a third or fourth bike will put more weight further away from the trailer hitch creating addition stress that could damage not only the trailer hitch, but the vehicle frame where the hitch is mounted. It is similar to using a pipe extension on a wrench to break a rusty bolt.

If you are interested in a class I compatible bike rack, then I would recommend looking at the Swagman Trailhead 2 Bike Rack, # S63360. This bike rack is also available in a 3 bike versions, # S63365, and a 4 bike version, # S63380. Keep in mind, you can only carry two bikes when using a bike rack with a class I trailer hitch. The Trailhead bike racks are compatible with both 1-1/4 inch and 2 inch trailer hitch receivers and tilt forward giving you full access to the trunk of your vehicle.

I have attached a video review of this bike rack for you to check out.

expert reply by: John H

0

Answer 1

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...