How To Install The Timbren Front Suspension Enhancement System TGMFK25D

Question

Question:

etrailer, Do you have an install video on Timbren GMFK25D? I see a bunch of video on rear but not front. Please send me a link if you do have one for this part #

asked by: Tim H

0

Expert Reply:

The Timbren Front Suspension Enhancement System # TGMFK25D installs in a very simple manner. We do not have an official installation video for this product, but I have attached a video that reviews a similar product. At the approximate time of 3:48 in the video, you will see a brief clip showing these Timbren jounce springs being screwed onto the vehicle. This is actually a pretty good representation of how simple it is to install these. You will lift the vehicle in the air, letting the suspension hang down stress-free. This will allow you to remove the factory bump stops and screw on the new jounce springs by hand, not requiring any drilling or power tools. I have also attached the installation instructions for this system.

expert reply by: Andrew N

0

Installation Instructions For Front Timbren
(click to enlarge)

Answer 1

Timbren rear-axle jounce spring kit #TGMRTT35D is intended for severe service vehicles such as tow trucks so for your towing/cargo application you will use kit #TGMRCK25D. This no-drill install is suitable for heavy-duty trucks like your 2500…

view full answer...

Answer 2

The difference between the Timbren Jounce Springs #TGMRCK25D and #TGMRTT35D for your 2019 Chevy Silverado 2500 is that the former is for standard pickup truck use while the latter is for Severe Service vehicles only. Since it doesn't sound…

view full answer...

Answer 3

Timbren helper springs #TGMRCK25D and #TGMRTT35D have different designs. The springs for kit #TGMRCK25D are double-convoluted. For optimal balance between softness and toughness, fabricators choose the double-convoluted rubber spring. Taller than the…

view full answer...

Answer 4

After installing the Timbren Front Suspension Enhancement #TGMFK25D in your 2015 Chevrolet Silverado 3500 DRW 4WD Long Bed you will not need an alignment. This is due to this suspension enhancement not requiring you to remove or modify any of your…

view full answer...

Answer 5

The biggest difference between the two parts is that the Timbren Rear Suspension Enhancement System #TGMRCK25D is a double-convoluted spring while the Timbren Rear Suspension Enhancement System #TGMRTT35D are single-convoluted springs. The…

view full answer...

Answer 6

The Timbren Front Suspension Enhancement System #TGMFK25D that you referenced is confirmed to fit your 2016 Chevy Silverado and does include 4 jounce-style springs. There are actually two factory bump stops at each end of the front axle on your…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...