Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The BedRug Custom Truck Bed Mat #BR94FR you referenced is designed specifically to work with truck beds with spray-in liners. It also has a ribbed bottom to match up with the slots of the bed floor. The carpeted top will make sliding in your truck…
view full answer...The Furrion camera system we have is a closed system and would not be compatible with the in-dash display so you would need to purchase GM's camera system to be able to connect to your display instead of having another monitor. If you do end…
view full answer...The new GM trucks are a little more challenging to use the Furrion Vision S camera systems like the part #FOS43TASF that you referenced but we have easy solutions that fix the problem. For a plug in adapter that installs inline with your 7-way…
view full answer...Yes, you can add the Reese Dual Cam High-Performance Sway Control part #RP26002 to the Reese Weight Distribution System part #RP66022. This will give you the Strait-Line Weight Distribution System part #RP66074.
view full answer...The Reese Dual Cam system #RP26002 will still work with one or two links. I will say, however, this will not work with all the Reese round bar systems. The bars must have the curved lip at the end that can seat into the #RP26002. Higher rated bars…
view full answer...You have 3500 lbs to play with here, so towing that trailer should not be a problem. You do not need the w/d system to extend the towing capacity of the hitch, but the systems do have other benefits. Because a w/d system removes some of the tongue…
view full answer...Sway controls are designed to be used in situations where sway is a direct result of some type of road condition, like high winds or large vehicles passing. If you have sway with a trailer under normal towing conditions, sway control will most likely…
view full answer...You ask a very good question. A circumstance like yours where you have widely varying loads on your car hauler trailer makes use of a weight distribution hitch something of a challenge. For weight distribution systems to be effective but not cause…
view full answer...The Timbren Front Suspension Enhancement System #TGMFK25D installs in a very simple manner. We do not have an official installation video for this product, but I have attached a video that reviews a similar product. At the approximate time of 3:48 in…
view full answer...Installing the P3 brake controller #90195 on your 2015 Chevy Silverado 2500 with factory integrated controller will actually be very simple. What you will do is use harness #3016 which plugs into a port on the truck already. But you will need to…
view full answer...The Timbren Front Suspension Enhancement System #TGMFK25D that you referenced is confirmed to fit your 2016 Chevy Silverado and does include 4 jounce-style springs. There are actually two factory bump stops at each end of the front axle on your…
view full answer...After installing the Timbren Front Suspension Enhancement #TGMFK25D in your 2015 Chevrolet Silverado 3500 DRW 4WD Long Bed you will not need an alignment. This is due to this suspension enhancement not requiring you to remove or modify any of your…
view full answer...