Parts Needed to Wire Trailer With Electric Brakes
Question:
Im looking to install brakes on my tandem axle trailer that currently does not have brakes. Im going to be using Item # AKEBRK-7-SA brake set but what else will I need as far a wire and connector end. Possibly missing a few items as well or what would you recommend? Thanks for you help
asked by: Parker B
Expert Reply:
To add trailer brakes you'll want to start by adding a new 7 way trailer connector; for that I recommend using the Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector # HS381-9000, which will give you a 7 way and a way to install all of the wiring cleanly. You'll also need some 12 gauge wire, which is available by the foot with part # 12-1-1 and some butt connectors # DW05745-10 to make the connections to the wiring.
Other than that, you'll just be making connections and running wires, so outside of the # AKEBRK-7-SA those would be the only additional parts needed. If you currently have idler hubs and don't already have hubs/drums you will need to know the bearings that are currently in your old hubs; that would allow us to match up your old idler hubs to new hub and drums.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 10
- Wiring
- Wire Connectors
- Butt Connectors
- 12-10 Gauge
- Deka
more information >
Product Page this Question was Asked From
Wiring Kit for Hydrastar Electric Over Hydraulic Actuators
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Wiring
- Hydrastar
more information >
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5-1/2
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre Greased
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Video: Review of Dexstar Trailer Tires and Wheels - Wheel Only - DEX54FR
- Shop: Dexstar Steel Spoke Trailer Wheel - 15" x 5" Rim - 5 on 4-1/2 - Black Powder Coat
- Shop: Trailer Wiring
- Q&A: Upgrading 4-Way of Trailer to 7-Way to Wire Battery for Powering Trailer Interior/Exterior Lights
- Q&A: How Do I Clean the Terminals in a 7-Way Connector
- Q&A: Parts Needed For Replacing Trailer Wiring On a 22 Equipment Trailer
- Q&A: Parts to Install Full 7-Way Wiring Kit on Trailer
- Q&A: Installation of Trailer Wiring Harness Through Frame or Conduit on 6x12 Trailer
- Q&A: How to Wire Electric Brakes on a Tandem Axle Trailer
- Video: Choosing the Right Trailer Wiring
- Search Results: 25580
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: brake controller
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Video: etrailer Electric Trailer Brake Kit Installation
- Search Results: fender
- Article: Most Popular Wheel Bearings
- Shop: Gooseneck Hitch
- Search Results: equalizer
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: trailer brake controller
on Accessories and Parts
