Is There a Front Hitch for a 2013 Ram 3500 That Allows You To Keep Fog Lights

Question

Question:

IS there a front hitch for a 2013 ram 3500 dually 4x4 6.7HO that will allow you to keep your fog lights

asked by: Raymond M

0

Expert Reply:

The EcoHitch Hidden Front Mount Trailer Hitch Receiver part # 306-X7900 which is a fit for a 2013 Ram 3500 and what I recommend due to the concealed install will allow for the factory fog lights to stay in place.

expert reply by: Conner L

0

Answer 1

The front mount trailer hitch I recommend for a 2012 Ram 3500 4x4 is the Draw-Tite Front Mount Trailer Hitch Receiver part #65063 which requires the least amount of modifications and also has the cleanest install look but does require that you have…

view full answer...

Answer 2

The EcoHitch Hidden Front Mount Trailer Hitch Receiver part #306-X7900 is a great option for a 2018 Ram 2500. It does not require factory tow hooks to be present for installation. It comes with everything needed for installation on models with or…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The factory prep package on a 2018 Ram 3500 is pretty apparent so odds are you don't have this if you are unsure. If the indentations for the four outer pucks and center gooseneck hitch ball are present but there are no actual holes in the truck…

view full answer...

Answer 9

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 12

I attached a picture of how the Draw Tite front hitch part #65063 installs and it uses the tow hooks to bolt through the mounting plate of the hitch to the truck frame. Since you have the area available where the tow hooks install I'd recommend…

view full answer...

Is There a Front Hitch for a 2013 Ram 3500 That Allows You To Keep Fog Lights

Product Page this Question was Asked From

Continue Researching