Review of EcoHitch Front Receiver Hitch - Custom Fit Hitch - 306-X7900 Video

For your 2007 Ram 3/4 ton, I'd recommend the Curt #C31017 which would mount to the underside of the frame members and would have the receiver tube sitting directly under the front bumper. I spoke with my contact at Draw-Tite who confirms that…

There's a few differences. • The Curt #C31017 is manufactured in the US, while the Draw-Tite #65046 is manufactured in Mexico. • When installed, the Curt hitch will sit higher on the vehicle for more ground clearance. The underside of the…

You are correct that if your 2018 Ram 2500 has the factory tow hooks, they will need to be removed to install the EcoHitch Front Mount Trailer Hitch Receiver #306-X7900 but they will not be able to be reinstalled. With that said the #306-X7900 has…

I contacted my Curt Manufacturing rep, who tells me the total drop of their #C31017 is 4-1/4 inches. The drop is the distance from the top surface of the mounting flange that would sit flat against the underside of the frame members to the lowest…

The Draw-Tite Front Mount Trailer Hitch Receiver part #65046 is designed to sit flush with the underside of the lower bumper fascia skirt on a 2003 Dodge Ram 3500. I have attached a photo which shows this. It sits as close to the underside of the…

Yes, the Curt front hitch part #C31017 that you referenced will fit your 2005 Dodge Ram 2500 Power Wagon. We checked with Curt and the only version of the 2005 Ram 2500 or 3500 that this hitch won't fit is the 3500 Laramie.

The 2 inch receiver for the EcoHitch Hidden Front Mount Trailer Hitch #306-X7900 referenced in your question will actually protrude through the grille of your truck. This allows for a really clean appearance while also maintaining your existing…

I went out to the warehouse and measured the Demco Hydraulic Brake Actuator item #DM72VR. The bolt hole spread is 3". I have linked a diagram below. I have linked a diagram I made below and another one that will show you a few dimensions.

For your 2018 Ram 2500 we have two front hitches that are confirmed as a fit. We have the Draw Tite part #65063 which has the hitch opening much higher as it comes out of the lower bumper or we have the Curt part #C31015 which has the hitch opening…

If you're getting no power through the spark plug then it most likely needs to be replaced. Looking at the owner's manual for the SUA2300i it appears that they want you to clean or replace the spark plug every six months or 100hrs of usage.…

The front mount trailer hitch I recommend for a 2012 Ram 3500 4x4 is the Draw-Tite Front Mount Trailer Hitch Receiver part #65063 which requires the least amount of modifications and also has the cleanest install look but does require that you have…

The EcoHitch Hidden Front Mount Trailer Hitch Receiver part #306-X7900 which is a fit for a 2013 Ram 3500 and what I recommend due to the concealed install will allow for the factory fog lights to stay in place.