EcoHitch Hidden Front Mount Trailer Hitch Installation - 2018 Ram 2500 Video

I attached a picture of how the Draw Tite front hitch part #65063 installs and it uses the tow hooks to bolt through the mounting plate of the hitch to the truck frame. Since you have the area available where the tow hooks install I'd recommend…

There's a few differences. • The Curt #C31017 is manufactured in the US, while the Draw-Tite #65046 is manufactured in Mexico. • When installed, the Curt hitch will sit higher on the vehicle for more ground clearance. The underside of the…

For your 2018 Ram 2500 we have two front hitches that are confirmed as a fit. We have the Draw Tite part #65063 which has the hitch opening much higher as it comes out of the lower bumper or we have the Curt part #C31015 which has the hitch opening…

The Draw-Tite Front Mount Trailer Hitch Receiver part #65046 is designed to sit flush with the underside of the lower bumper fascia skirt on a 2003 Dodge Ram 3500. I have attached a photo which shows this. It sits as close to the underside of the…

Yes, the Curt front hitch part #C31017 that you referenced will fit your 2005 Dodge Ram 2500 Power Wagon. We checked with Curt and the only version of the 2005 Ram 2500 or 3500 that this hitch won't fit is the 3500 Laramie.

I contacted my Curt Manufacturing rep, who tells me the total drop of their #C31017 is 4-1/4 inches. The drop is the distance from the top surface of the mounting flange that would sit flat against the underside of the frame members to the lowest…

The 2 inch receiver for the EcoHitch Hidden Front Mount Trailer Hitch #306-X7900 referenced in your question will actually protrude through the grille of your truck. This allows for a really clean appearance while also maintaining your existing…

The capacities listed are specified for the way you use the trailer hitch, part #C31083. If you are using the hitch for a trailer the capacity is 5,000-lbs due to the stress vertically as well as the stress of pulling a trailer. The 9000-lb straight…

For a lock that is fit your UFP brake actuator I recommend the Fastway Universal Trailer Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers #FA86-0015-318. This lock wraps around the coupler and uses a ball and shackle design. It…

For your 2018 Ram 3500 4x4 non-cab and chassis the correct Timbren kit for the front axle is the one you bought, part #TDF25004B. The #TDF25004E only fits the cab and chassis models and even if it did fit would be very harsh and stiff for your…

I spoke to my contact at Timbren and they informed me that the Timbren Suspension Enhancement System part #TDF25004E is 4-5/8" tall. I do not have any dimensions of the factory bump stops on your 2018 Ram 2500 unfortunately but you can use the…

Nope, the airflow to the intercooler radiator on your 2018 Ram 3500 will not be disrupted when you install the EcoHitch front hitch that fits, which is the following part number: - EcoHitch Hidden Front Mount Trailer Hitch Receiver #306-X7900