Replacement Parts for Curt A16 Fifth Wheel Hitch

Question

Question:

do you sell curtis a-16 fifth wheel parts

asked by: Alfred S

0

Expert Reply:

For the Curt A16 fifth wheel hitch part # C16120 we have the replacement head unit part # C16520, replacement base legs # C16920, replacement center pin # C43UR, and replacement galvanic isolators part # C83FR.

expert reply by: Jameson C

0

Answer 1

It is possible to use a fixed fifth wheel hitch on a 2020 GMC Sierra 2500 but it all comes down to the trailer. If you were using the same trailer on another short bed truck without issue the odds are you will be fine with a fixed fifth wheel hitch.…

view full answer...

Answer 2

It's totally normal for a bit of movement between any fifth wheel hitch and the base rails. The feet on the hitch are typically a bit smaller than the slots they slide into for mounting otherwise you'd have a hard time getting your hitch in…

view full answer...

Answer 3

MOryde's pin box cushioning wouldn't work with a rotating pin box like their You Turn line since the wear pads would constantly be engaging every time you went to make a turn and would delay the pin box from rotating since there would be…

view full answer...

Answer 4

We went ahead and looked up the information regarding your Kedu HY60D switch. For a compatible switch that will work, I recommend the Mini Momentary Switch - On/Off/On - DPDT #37213445. This particular switch has a cutout dimension of 0.745 inch tall…

view full answer...

Answer 5

The correct replacement landing gear switch for your trailer is the Lippert Ignition Proof 5th Wheel RV Landing Gear Switch part #LC145236, you'll just simply cut the wires from the old switch and attach the new one with butt connectors like part…

view full answer...

Answer 6

While the specific Atwood switch you are in need of is no longer around since Atwood stopped offering it you can use the part #LG-145236 that you referenced as the switch setups are fairly universal in how they function.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 10

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 11

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 12

Yes you are - all 5th wheel hitches are going to require some type of rails in order to be used. So you'd need #DM8552016-71 for your 2006 Dodge Ram.

view full answer...

Replacement Parts for Curt A16 Fifth Wheel Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching