Recommended Power Lift Roof Vent w/12V Fan That Is Powered By Wall Switch

Question

Question:

im replacing a older model vent fan that has manual controls and when I turn a switch on on the bathroom cabinet it opens and comes on. will this one do the same looks like it has electronic controls so when power is turned off will it default to off.

asked by: Paul K

0

Expert Reply:

I have another option but the MaxxFan Deluxe Roof Vent w/ 12V Fan # MA00-05301K you were looking has a manual lift requiring you to use the hand knob to open and close the vent and will not be able to be powered by your wall switch.

Instead I recommend the Ventline Ventadome Roof Vent w/12V Fan and Wall Switch # V2119-1-533 which includes a new switch to be able to control the lift and fan, as we do not offer a fan that will power the fan and open the vent with the same switch.

I also recommend the Roof Vent Installation Kit # 344270KITW to make sure you do not have leaks after the install.

I included videos of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

Answer 6

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 7

The hangers you currently have on your trailer are ones I have run into before. That being said, I spoke with MORryde and the #MR27ZR will still fit your trailer, but there is a modification that will need to be made. You’ll have to trim according to…

view full answer...

Answer 8

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

view full answer...

Answer 9

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

view full answer...

Answer 10

It looks like your MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR are longer than your previous equalizers were because your leaf springs are way too close to each other. The shackles should be creating more of a "W" shape instead…

view full answer...

Answer 11

I can help you figure out how to determine the best option for a wet bolt/shackle upgrade kit, though in order to determine the correct one you will need to take a quick measurement of the shackle straps on your Jayco Jay Flight. The reason for that…

view full answer...

Answer 12

I reached out to MORryde and the MORryde Rubber Equalizers for Tandem Axle Trailers - 35" Wheelbase - 8K #MR27ZR you were looking at is designed for 35" axle spacing and would not work with your trailer with 36" axle spacing. My…

view full answer...

Recommended Power Lift Roof Vent w/12V Fan That Is Powered By Wall Switch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching