Hitch For A 1998 Nissan Pathfinder Pulling A Mid Sized Pop-Up Camper

Question

Question:

Im interested in buying a hitch for my 97 Nissan Pathfinder for towing a small-medium size pop-up camper. What do you suggest? Thanks,

asked by: Mark S

0

Expert Reply:

For your 1997 Nissan Pathfinder I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13088 to pull a mid sized pop-up camper. The hitch has a 500lb maximum tongue weight capacity and a 5000lb towing capacity. It can be used with weight distribution. The tongue weight goes up to 600lbs and the trailer weight goes up to 6000lbs.

If you are going to be pulling a trailer you are going to need light functions. I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Item # 118361. This kit is a simple plug in wiring harnes that provides a 4 pole plug to provide the proper light function on the trailer. It simply plugs in to the factory plugs behind each taillight.

expert reply by: Shane H

0

Answer 1

There could be a couple of issues with the trailer wiring on your 1996 Nissan Pathfinder. Since you have determine that the trailer lights work on other vehicles, we will need to look at the vehicle for the problem. My first instinct is that you have…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 5

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Yes, it is! Honda and other manufacture's like to leave the fuses out of new vehicles that do not come with a functional towing package to save on costs. You can verify if you're missing the fuses by checking your fuse box but I am pretty…

view full answer...