Hitch Fit for 2020 Mazda 3 Sedan

Question

Question:

does Draw-Tite 24982 trailer hitch work for a Mazda 3 hatchback?

asked by: Julio

0

Expert Reply:

The Draw-Tite # 24982 Class I hitch is a fit for 2019 - 2021 Mazda 3 Sedan, so it'll work perfectly for you.

If you'll be using the hitch for light duty towing, you'll also need a trailer wiring harness like # 118808, a ball mount like part # 3593 and a trailer ball like # 19256 for a 1-7/8 inch ball or # 19258 for a 2 inch ball.

expert reply by: Mike L

0

Answer 1

The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #24982 you were looking at is confirmed to fit your 2021 Mazda 3 Sedan AWD and is a great option for a bike rack due to its 200lb tongue weight rating. Depending…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Generally speaking wheel mount only bike racks are preferred. Especially for people with carbon fiber bike frames since frame mounts aren't recommended at all with them otherwise damage could occur. For other frame designs people still prefer…

view full answer...

Answer 9

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 10

Actually, the correct hitch for the sedan model of the 2019 Mazda 3 is part #24982 instead of part #24914. It's also a 1-1/4 inch Class I hitch like the first Draw-Tite you mentioned. I've attached a picture that shows it installed for you.…

view full answer...

Hitch Fit for 2020 Mazda 3 Sedan

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching