Trailer Hitch to Fit a 2019 Mazda 3 Sedan

Question

Question:

Hello, i just want to ask if this product fit to my new mazda 3 sedan 2019? or wich one is the correct for my vehicle Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 Item # 24914

asked by: Javier

0

Expert Reply:

Actually, the correct hitch for the sedan model of the 2019 Mazda 3 is part # 24982 instead of part # 24914. It's also a 1-1/4 inch Class I hitch like the first Draw-Tite you mentioned.

I've attached a picture that shows it installed for you. As well as a link to the install details

expert reply by: Charles S

0

click to enlarge

Joe

4/28/2020

Did you use hitch 24982 for 2019 mazda 3 sedan? Looks good and the whole frame of the hitch is hidden. How about in 2019 mazda 3 hatchback? How does it look like when installed? Any photos?

Reply

Chris R.

4/30/2020

The Draw-Tite # 24982 is custom designed for the 2019 Mazda 3 sedan so it is a perfect fit. Like you mentioned it features a nice hidden-crosstube design for a clean appearance. The hatchback model requires a different hitch with the Draw-Tite # 24984. We haven't had a chance to install this hitch so we don't have any good pictures available, although it also features the hidden-crosstube design.

Reply

Answer 1

We do! The trailer hitch you're looking for comes from Draw-Tite: - Draw-Tite Sportframe Trailer Hitch Receiver #24982 This will give your 2022 Mazda 3 Sedan a Class I hitch with a 1-14" receiver. While this does give you a hitch…

view full answer...

Answer 2

We actually have a great hitch that fits your 2022 Mazda 3 sedan! That is the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #24982. This hitch provides your Mazda 3 with 200 pounds of maximum tongue weight and…

view full answer...

Answer 3

When it comes to using a motorized mobility lift on your 2021 Mazda 3, there are a few things to consider. The first is tongue weight capacity (the vertical load limit). The Curt Hitch #C98BR has a maximum tongue weight capacity of 200 pounds. As…

view full answer...

Answer 4

The EcoHitch Hidden Trailer Hitch Receiver #EH23VR is confirmed to fit the 2019 Mazda 3 sedan. Unfortunately, it will not fit your Mazda 3 hatchback. For a hitch that is a confirmed fit for your 2019 Mazda 3 hatchback, I recommend the Curt Trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like…

view full answer...

Answer 9

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 10

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 11

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 12

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Trailer Hitch to Fit a 2019 Mazda 3 Sedan

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching