Modern Tire Size Equivalent for 20.5x8-10

Question

Question:

will these work? looking to replace 20.5x8-10 tires

asked by: Krista

0

Expert Reply:

The modern size equivalent of the 20.5x8-10 that you have currently would be the same size tire that is on the # AM3H340 that you referenced, 205/65-10.

As long as the bolt pattern of your current hubs are 4 on 4 inch the wheels of this would bolt up to your trailer as well.

I attached a help article on determining bolt patterns for you to check out too.

expert reply by: Jameson C

0

Answer 1

Sometimes the best option is to replace the hub when nothing is available that fits. In your case, we have a wheel and tire combination that will work perfectly so it won't be necessary. The Kenda Loadstar 205/65-10 Bias Trailer Tire #AM3H454…

view full answer...

Answer 2

The 205/65-10 and the 20.5 x 8-10 would be very close in size. Assuming that 20.5 is the diameter of the tire and 8 is the width. The Kenda 205/65-10 Bias Trailer Tire with 10 inch White Wheel, #AM3H390, for example, is 8.3 inches wide with a…

view full answer...

Answer 3

The 205/65-10 trailer tire size comes in different load ranges and each load range has a different psi requirement. A load range B in this size should be inflated to 35 psi. Load range C inflate to 50 psi. For load range D inflate to 70 psi. And…

view full answer...

Answer 4

The Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range B #AM3H360 will give you a slightly smoother ride when empty, but I still recommend using the Load Range C option #AM3H400 because it will be a…

view full answer...

Answer 5

The difference between load ranges varies based on the tire size and brand. When comparing two tires of the same size and brand, a load range D tire will always have a greater weight capacity and psi rating than a load range C. However, when…

view full answer...

Answer 6

The modern day equivalent of a 20.5 x 8-10 tire is going to be a 205/65-10. The dimensions are as close as you can get to the old size. We have several tires and tire and wheel combos in this size with various bolt patterns (if a wheel is needed).…

view full answer...

Answer 7

Kenda is the name of the tire manufacturer, and Loadstar is the name of the model or tread design of the particular tire. If you click on the second thumbnail photo under the photo on the product description page, and scroll your cursor over it, you…

view full answer...

Answer 8

If you check around the coupler of your trailer on the frame you should find a plate with axle capacity, tire size, and the VIN listed. That would be your best way of determining the original tire size that was on your 1993 Jayco 1206 pop up. That…

view full answer...

Answer 9

A tire size of 20.5 x 8.0 -10, will fit a wheel that is 10 inches in diameter and is 6 inches wide, like the item you selected, Dexstar Steel Trailer Wheel, part #AM20046. This wheel has a 5 on 4-1/2 inch bolt pattern, so you will need to measure the…

view full answer...

Answer 10

On a towing setup you are always limited by the lowest rated component as the overall towing capacity since that is the weakest point. When it comes to trailer tires you always want to have them inflated to their max psi when cold. Not only do you…

view full answer...

Answer 11

It is possible to change out your trailer axle, hubs, wheels and tires to different/larger types but do note that replacing the axle and hubs will not necessarily increase the trailer's capacity to carry weight. Actual trailer weight capacity is…

view full answer...

Answer 12

The modern size for the 20.5x8x-10 is 205/65-10 which we offer that with a rim that has a 5 on 4-1/2 inch bolt pattern is part #AM3H480. For a similar setup with a 4 on 4 inch bolt pattern you'd need the #AM3H460.

view full answer...

Modern Tire Size Equivalent for 20.5x8-10

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching