Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM
(158 reviews)
Price: $22.27
In Stock
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM
Item # 3026-P
Retail:$31.39
Our Price: $22.27
You Save: 29%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (158)
- Q & A (0)
- Photos
Tekonsha Accessories and Parts - 3026-P
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Tekonsha
- Vehicle Specific
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.
Features:
- Wiring adapter eases installation of your electric brake controller
- Custom connector end plugs into the built-in port beneath the dash of your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523)
- Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510)
- Limited 1-year warranty
Installation of Tekonsha Brake Controller Adapter
This adapter plugs into the 6-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.
To install your electric brake controller you need to connect the wiring of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter.
This adapter requires no hardwiring. It is designed to plug directly into your electric brake controller for the simplest installation possible. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time and securely stow it away.
302600 Tekonsha Brake Control Wiring Adapter with 2 Plugs
Replaces 3026-P
Installation Details
This Product Fits The Following Vehicles
- 2007 - 2016 GMC Acadia with factory Tow Package
- 2013 - 2016 GMC Acadia without factory Tow Package
- 2017 - 2017 GMC Acadia Limited with factory Tow Package
- 2017 - 2017 GMC Acadia Limited without factory Tow Package
- 2008 - 2017 Buick Enclave with factory Tow Package
- 2013 - 2017 Buick Enclave without factory Tow Package
- 2007 - 2010 Saturn Outlook with factory Tow Package
- 2009 - 2017 Chevrolet Traverse with factory Tow Package
- 2013 - 2017 Chevrolet Traverse without factory Tow Package
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM - 3026-P
Average Customer Rating: 4.8 out of 5 stars (158 Customer Reviews)
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.by: Kirk 02/28/2024
2017 Chevrolet Traverse
I am a retired auto mechanic so I truly know and appreciate when something is actually plug and play. Our 2017 Chevrolet Traverse had the factory V92 trailer towing package listed on the build sheet so the plug for the trailer brake was where it was supposed to be. The controller is easy to adjust and has an LED display to let you know if it senses a connection. Additionally, there are three levels of brake application based on trailer weight. We tow three different trailers so this feature is appreciated. Completely works as advertised and all for a good price.
by: Daniel 01/05/2023
The plug matched the truck's wiring harness and works good. The instructions were very clear and easy to use.
by: Ron & Lynda08/24/2017
Our new Tekonsha brake controller was super easy to install. We are new RVer's and are will use it today for the first time when we pick up our travel trailer from the dealer.
Looking forward to many safe miles because of that device.
We are telling everyone we meet about the great prices and service at etrailer.com
Thanks,
Ron & Lynda Kimball
by: Dan 06/05/2023
2015 Chevrolet Traverse
Needed this to plug into the factory wiring on my 2015 Chevy Traverse LTZ. It is not equipped with a dash port for direct plug in, but Chevy does leave wiring with a factory plug end under the floor liner. Once I found that, this mated, and made hook up of the brake controller easy. No splicing or cutting necessary to install my brake control module.
by: Larryo07/16/2015
2014 GMC Acadia
On Monday I ordered a Teknosha Prodigy P3 Proportional brake controller and interface cable from trailer.com. I received these items via UPS ON Wednesday ( I chose to pay for two day shipping because I'm picing up a new travel trailer on Saturday).
Today (Thursday) I installed the controller in my 2014 GMC Acadia. It was fully installed in les than 20 minutes. I will functionally check it this weekend. Etrailer.com responded quickly to my order and I received the items on time.
by: Anthony06/05/2020
The Tekonsha Primus IQ was very easy to install with the GM wiring harness. I had everything installed in about 45 min. and it works great on my 2015 Chevy Traverse. etrailer.com had my order at my door within 3 days and offered free shipping. Can’t ask for much more than that.
by: Bill Mitchell 04/27/2016
2015 GMC Acadia
The wiring harness plugged into the 2015 GMC Acadia connector for my 7 wire electric brake controller. I had to drill a hole in an access panel under the steering column so that the harness could attached to the brake controller. Everything worked as anticipated. I did have to purchase a special upholstery tool kit from NAPA (plastic tools) to remove the connectors on the access panel. I would recommend this harness and the corresponding electric brake controller for any GMC vehicle that can pull a trailer that has electric brakes.
Bill M.
4/27/2017
The brake controller has been working great! I have not had any problems. Setting the braking strength is easy when moving from a loaded trailer to an empty trailer. I would recommend this controller for all GM vehicles capable of pulling a trailer with electric brakes.
by: Easy install06/16/2016
Very easy to install. Haven't got a trailer to set yet, but from other reviews, looks like it will be easy.
by: Justin03/17/2023
Truly makes installing the brake controller a snap... two snaps actually.
by: John J.03/02/2016
Just what I needed to hook my new brake controller up and get ready for our camper. Couldn't be easier. Plug in to the Traverse's wiring harness, and plug the other end in to the brake controller. Perfect match!
John J.
3/2/2017
The connection is as strong as it was when I instaled it.
by: Mike A.08/28/2015
2011 GMC Acadia
This cable made it super easy to install the brake controller into my 2011 GMC Acadia Denali and didn't have to mess with splicing wires.
Mike A.
8/27/2016
Made installation fast and easy. Worked perfectly.
by: Allen12/15/2020
Great product and service. etrailer website and its videos were excellent in helping chose the right product set up and instillation. The Tekonsha Plug-in Wiring Adapter for Electric Brake Controller was just the ticket for my Chevy Traverse. Easy instillation and Works as advertised. Very happy and would buy from both Tekonsha and etrailer again without reservation.
by: Aaron G.05/31/2017
2013 Chevrolet Traverse
I ordered item 3026-P to connect a 2013 Chevy Traverse with a Tekonsha Prodigy P2 Brake Controller. My Traverse has the factory installed Tow Package (V92), so the harness plug is already populated and ready to plug into the 3026-P.
The pre-wired harness fit perfectly to my 2013 Traverse. After hunting for the factory plug hidden under the dash, the harness installed easily and locked into place. There is plenty of slack to route where desired on either side of the steering column. I chose the left side for a more flush bracket install against the plastic under-dash cover. The harness installed perfectly into the Prodigy P2. The unit instantly powered up and appeared nominal in operation.
I look forward to using the combination of these 2 items to safely haul around a travel trailer in the near future, which is why I preinstalled these.
One thing to keep in mind is that there is live voltage on the black wire when the harness is mated to the vehicle plug, so if you install the harness but remove the Brake Controller (when not used or used between 2 vehicles), be sure to cover the open harness end with a rubber cap or electrical tape, to keep from shorting it to any ground point.
Great product, excellent pricing, and easy to find for my specific configuration!
by: Dan OB04/29/2017
Chevrolet Traverse
I ordered the Tekonsha P-3 brake controller from etrailer because they would ship it with the correct cable assembly for my Chevy Traverse at a very good price. It came with good directions and installed easily and quickly. I've taken my trailer out one time now and the Tekonsha brake controller performed flawlessly. While this is a small sample size so far, I would highly rate etrailer and the Tekonsha brake controller.
by: Not2FarSouthDan05/11/2018
2017 Chevrolet Traverse
Bought item from etrailer, although there seems to be some confusion as to it's use for a Prodigy P3 90195 Brake Controller install on a 2017 Chevrolet Traverse LT with Tow Package. I'll put it all to rest right now. Mine installed in mere minutes. Grey plug taped to wire harness running up against firewall right above the parking brake assembly. Matched and fit perfectly. Once I noticed the issues I tested the connectors in that plug to insure I had a ground, constant power supply and a power supply when the brake pedal was depressed and that is when I knew the others who had issues with the simple install I've described had much different setups then did I.
by: Chester09/27/2018
2018 Chevrolet Traverse
Wrong connectors for my 2018 Traverse as it had pigtail leads under the door sill plate.
Mike L.
9/27/2018
The 2018 Chevy Traverse is a split model year. There is a 2018 Traverse, which is the first year of the new generation vehicle, and theres a 2018 Traverse Limited, which is mechanically identical to the 2017 model. The Traverse Limited uses the # 3026-P wiring harness, but the 2018 model will not have the plug under the dash. There are blunt cut wires behind the kick panel to the left of the drivers left foot. The controller pigtail would wire directly to these wires as follows: Red/Blue striped tow package wire to black wire on controller. Black tow package wire to white wire on controller. White and blue striped tow package wire to red controller wire and blue tow package wire to the blue controller wire.
by: Girl in the car 04/04/2014
GMC Acadia
Got the Tekonsha P2 brake controller. Very simple to install since my Acadia had a tow package on it from the factory. Just plugged it in! Mounted with Velcro since I didn't want to drill into my nice new dashboard. (Requires frequent pressing to keep stuck - lol.) Can't tell you how the controller works because I ended up not buying the trailer I was looking at. :(
Zac at etrailer was extremely helpful and courteous. Would definitely recommend them and will buy from them again. They beat all my local prices and shipping was fast.
Thanks etrailer!
by: Paul S.06/03/2015
Was wired wrong from the get go. The picture shows the wiring at the controller plug as: Black, Red, White, and Blue. The one I received had the Red and White wires reversed. The vehicle side plug was also wired wrong: 2 wires went to empty positions on the vehicle plug. After sorting it all out with the schematics that came with the controller, and MUCH frustration with the switched wires, I manage to get it working. The controller works great! Just give the wires a look over for proper sockets/wiring.
by: Dave C.01/25/2014
Very quick delivery of quality parts. I'll be sure to use etrailer again if the need arises. The only problem I had was finding out how to remove the plastic panel below the steering wheel. There were three plastic plugs holding it in place, but sometimes plugs in other vehicles broke by just pulling them. In this case, there is a plastic washer that should be pried out about 1/4" with a screwdriver. Once it is pried out, you can grab the plug and pull down with your fingers. Really a great improvement by GM over older plugs.
by: Ron V.u08/30/2017
2014 GMC Acadia
I have used etrailer.com several times and I have found it very easy to order parts and receive these parts in a short period of time. This last order consisted of all the wiring harnesses controller and hitch for a 2014 Acadia. It also comes with very good installations papers. Only thing I wish it would have had extra with this order with the wiring harnesses need to have Dielectric grease to plug in to car to had had a small tube sent with those harnesses.
by: Scott S. 04/25/2017
I was very excited to find this product as I don't know much about vehicle wiring. At first, I was not sure if this item would work with the Brake Controller that I purchased but after contacting customer service, I found that it was exactly what I was looking for. The item itself is great as there is no connections that need to be made up, it is plug-and-play. The response I got from customer service also included images of exactly where I would find the corresponding connection and sure enough, it was right where they said it would be. Keep up the great work!
by: T.J. 02/05/2014
2013 Buick Enclave
I received the Tekonsha P2 controller and the 2 - click, made-to-fit wiring harness for my 2013 Enclave. It did, in fact, fit perfectly and the controller is a HUGE step up fom my previous non-proportional controller. Installation was literally 10 minutes! (Including reading the very clear instructions). Customer service from Tamara W was exceptional. She confirmed the correct part numbers and answered all my questions. Good price, good product and great service. Reward them with your business !
by: Mike Colon08/30/2015
2015 Chevrolet Traverse
Perfect harness! Made set up on my new 2015 Chevy traverse with tow package so easy. Removed plastic cover under steering wheel found grey plug and plugged in Boom done. Mounted brake controller and set up took 20min tops.
by: Thomas05/10/2018
2015 GMC Acadia
Rather than trying to rewire my old harness to match the new truck, it was great to just order the right cable. Simple plug and go. works great. In use for over a year now.
by: David11/28/2017
plugged in to controller and vehicle harness. Was up and running in 10 minutes.
David
11/28/2018
Works great. Move it between vehicles using extra pigtail.
25
158
Show More Reviews
See what our Experts say about this Tekonsha Accessories and Parts
- Brake Controller Recommendation for 2014 Chevy TraverseThe Curt Echo Mobile part # C51180 is super convenient and has had a few revisions to make it more reliable and better performing but the Prodigy P3 part # 90195 is basically the gold standard of brake controller due to how incredibly great it works and how reliable it is. For what you are wanting and the concerns you mentioned the P3 with the install harness part # 3026-P would definitely be the way to go.
view full answer... - Brake Controller Recommendation and Installation Details for a 2003 Chevy Silverado and Car TrailerFor a brake controller, I recommend the Tekonsha Prodigy P2, # 90885 and the wiring harness # 3015-P, for your 2003 Chevy Silverado. This is the newer version of the Prodigy that you have referenced. The differences are that the P2 has more mounting options; 360-degree vertical rotation. It has better protection; reverse battery protection for your truck and trailer breakaway systems (if installed). It has more versatility; can work with electric-over-hydraulic trailer brake systems. And...
view full answer... - Recommended 7-Way Wiring Harness and Brake Controller for 2015 Chevy TraverseFor your 2015 Chevy Traverse without factory 7-way should have a harness that will allow you to use the T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector # 118271 which will activate a factory harness when you install the relays and fuses. You may also be interested in a bracket like # 18138 and # 18140. You can then use the wiring harness # 3026-P which connects to the factory harness located underneath the dash to the left of the steering column, taped to...
view full answer... - Trailer Brake Controller Installation on a 2015 GMC AcadiaThe vehicle is indeed pre-wired, as you suspected. To get completely set up, you'll need a brake controller, the appropriate wiring harness to connect the controller to the vehicle and a trailer connector for the rear of the vehicle. All the rest of the wiring is ran, but you'll need some fuses and relays to activate the tow package wiring. For a brake controller, you can't go wrong with the Tekonsha P3, part # 90195. The P3 is one of the most user-friendly brake controllers available....
view full answer... - Brake Controller Connector Location on 2012 Chevy TraverseAccording to my Tekonsha representative, all models of the 2012 Traverse would have been equipped with the brake controller connector. The connector is located to the left of the steering column, as shown in the photo. You'd need the # 3026-P wiring adapter, and if you haven't chosen a brake controller, I'd recommend the Tekonsha Prodigy P2, part # 90885. The 3026-P would plug into the connector, and the other end would plug into the rear of the controller. You'll need to sever the blue...
view full answer...
- Recommended Trailer Brake Controller for 2018 GMC Acadia Your R-Pod Trailer has electric brakes from the factory, so you will need to install an electric brake controller in your 2018 GMC Acadia. If your Acadia has the factory tow package, then you can simply use the wiring harness # 3026-P and then connect a controller like the Prodigy P3 # 90195 which is my recommendation because of the ease of use. This controller has an LCD screen that takes code deciphering out the equation and offers you presets for the best braking with your trailer....
view full answer... - Brake Controller Insatll-2012 GMC Acadia w/ Factory Tow PackageIf your 2012 GMC Acadia was equipped with the factory installed 7-way trailer connector at the rear of the vehicle, then installing a brake controller will be a plug-and-play process. You'll need the # 3026-P brake controller wiring harness, as you mentioned. Other than attaching the controller in its desired mounting location and plugging in the harness, there's nothing else that needs to be done. Install the # TK90160 Primus brake controller under the dash, to the right of the steering...
view full answer... - Is There a Plug and Play Brake Controller Adapter for 2018 GMC AcadiaI have a solution for you, but there is not a plug for a brake controller that would allow for a plug and play installation on the 2018 GMC Acadia Denali, so even if you've got the factory trailer connector you would need to hard wire any controller in. For this reason I typically recommend using a wireless brake controller like the Curt Echo # C51180, which simply plugs into your 7 way trailer connector and uses gyroscopes to apply the brakes on your trailer in proportion to the braking...
view full answer... - Parts Needed to Tow Trailer with 2015 Buick EnclaveWe do have all of the parts you're going to need, so never fear! For a hitch I recommend using the etrailer # e98863, which has a nice, durable powder coating that will hold up to the rigors of towing. This is a custom fit hitch so there's no need for drilling to install. You'll also need a wiring harness, so I recommend using the Tekonsha # 118271, which will give you the 7 way plug you need to tow your trailer with brakes. For a brake controller I recommend using the Tekonsha Prodigy...
view full answer... - Wiring Adapter Recommendation/Installation for Draw Tite Activator part # 5504 in a 2014 GMC AcadiaThe correct harness to use to install your Draw Tite Activator part # 5504 would be the Tekonsha Plug-In Wiring Adapter part # 3026-P. The harness should be under your dash on the left side of the of the steering column. Check out the picture I attached that shows where it will be. Only four circuits will be needed to install the brake controller. Brake output, ground, 12 volt power, and stoplight switch. The extra wire could be for an illumination circuit. There are some brake controllers...
view full answer...
- Where to Wire Trailer Brake Controller In 2017 Chevrolet TraverseI took a look at your owner's manual and the 2017 Chevrolet Traverse has a bundle of blunt cut wires behind the instrument panel above the parking brake assembly for the electric trailer to wire a brake controller to. According to the owner's manual the harness contains the following wires: red/black: power supply white: brake switch signal gray: illumination black: ground The wires with the corresponding functions from the brake controller adapter like the one included with part # 90195...
view full answer... - Installing an Electric Brake Controller in a 2018 Chevrolet Traverse with a Factory 7-Way ConnectorThe Electric Brake Controller Adapter, part # 3026-P, is confirmed to fit the 2018 Chevrolet Traverse Limited. If you have a Limited model you should have the connector underneath your dashboard. Since you don't have the connector under your dash instead of using the # 3026-P adapter you need our # 5506 wiring kit to install the Prodigy P3, part # 90195. The wiring kit includes everything to power a brake controller. I've linked a video from when we installed our # ETBC7 kit on an older...
view full answer... - Where to Find Brake Controller Install Port on 2018 GMC AcadiaYour 2018 GMC Acadia actually has blunt cut wires for you to splice in a brake controller like the Tekonsha Prodigy P3 # 90195. The last Acadia to use the Adapter # 3026-P that you referenced was the 2017 Limited which was the same as the 2016 model year. The 2017 New Body and newer have the blunt cut wires up under the dash. I took a look at the online version of the owner's manual for your 2018 Acadia and on page 278 it says that the blunt cut wires can be found above the parking brake...
view full answer... - Best Location to Mount Tekonsha Prodigy P2 Brake Controller in 2015 GMC AcadiaThe best location for mounting your Tekonsha Prodigy P2 Trailer Brake Controller # 90885 is going to be to the right and below your steering wheel on the dash. Typically, drilling the necessary holes anywhere around this area will not be an issue, but the only way to really ensure you will not be coming into contact with anything behind the panel is to remove the panels first to locate any possible wiring behind where you plan on mounting the bracket. If you do not yet have a wiring adapter...
view full answer... - Brake Controller Install Harness Recommendation for 2018 Chevy Traverse LimitedWe have confirmed with Tekonsha that the # 3026-P is the correct brake controller install harness for your 2018 Chevy Traverse Limited. The interior may have changed in that year but the wiring for the brake controller is the same. For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking...
view full answer... - Curt TriFlex Brake Controller # C24VV Installation in 2014 GMC AcadiaTo install the Curt TriFlex Brake Controller # C24VV in a 2014 GMC Acadia without factory trailer connector you will need the brake controller unit and wiring harness, parts # C24VV and # C51515, along with a brake controller install kit, part # ETBC7. Your vehicle needs to have a working 4-pole flat connector in order to install the # ETBC7. The 4-pole plugs into the supplied 7-way. If your Acadia has the tow package with factory 7-way you will not need the # ETBC7. GMC no longer provides...
view full answer... - How to Install a 7-Way Connector on a 2012 Chevy TraverseIf you don't already have a wiring connector on your 2012 Chevy Traverse then that means you don't have the tow package and you need to install a 4-Way wiring harness and an adapter for a 7-Way. I am not sure what factory plug you found but when I spoke with my contact at Tekonsha he said that there was a change from the 2012 to 2013 Traverse models which is why the wiring kit # 118271 won't fit the 2012 model.If you send me a pic of the connector that you found I can try to help you identify...
view full answer... - Is The Tekonsha P2, P3 or Redarc Tow-Pro a Better Brake Controller For a 2014 GMC Acadia Personally I prefer the Tekonsha Prodigy P3 # 90195 over the P2 # 90885. Both of these do have the mounts which allow you to remove the controller when not needed. They will both connect to your factory tow package using the Pigtail # 3026-P. The main reason I prefer the P3 is the easy to read LCD screen which also has diagnostic capabilities built in should you have an issue with the trailer brakes down the road. In the event don't want to deal with having to install and remove the controller...
view full answer... - Troubleshooting Brake Controller Installation on 2016 Chevy Traverse with Factory Tow PackageIf you used the correct wiring harness # 3026-P, then you will need to test your factory harness in the lower left pin location for 12V power using a circuit tester like # PTW2993. If your fuses are good the only other thing is to check your wires under your hood as some vehicle require physically connecting a wire that is already run to a terminal. I've attached an article with photos to assist with this.
view full answer...
- Wiring Harness to Install a p2 Trailer Brake Controller on a 2002 GMC Yukon DenaliThe P2, Prodigy 2, Tekonsha P2 or Prodigy 2 are all the same brake controller, # 90885. We usually just call it the P2. For your 2002 GMC Yukon Denali and the P2 brake controller you would need harness # 3025-P. It is possible that you have a 6-Way connector on your Yukon. A 6-Way will have round pins, like # PK12720. But you might actually have a 7-Way blade style, such as # PK11893 which has 6 outside pins and one center pin. Either set up does have a brake output circuit so the controller...
view full answer... - How Does Trailer Brake Controller Install in 2018 GMC AcadiaYour 2018 GMC Acadia actually has blunt cut wires for you to splice in a brake controller like the Tekonsha Prodigy P3 # 90195. The last Acadia to use the Adapter # 3026-P that you referenced was the 2017 Limited which was the same as the 2016 model year. The 2017 New Body and newer have the blunt cut wires up under the dash. I took a look at the online version of the owner's manual for your 2018 Acadia and on page 278 it says that the blunt cut wires can be found above the parking brake...
view full answer... - Best Brake Controller for a 2016 Chevrolet TraverseYour daughter needs a brake controller, such as the Tekonsha Prodigy P2 Trailer Brake Controller # 90885 with the wiring adapter # 3026-P. The P2 is a top choice because of how easy it is to install and use. Since she already has the tow package the P2 just has to be mounted and plugged in under her dash. I've included an installation video of it being installed on a 2015 Chevy Tahoe which will be the same process on her Traverse.
view full answer... - Troubleshooting Brake Controller of 2014 Chevy Tahoe Not ActiveUnder the hood of your 2014 Chevy Tahoe there are some fuses that need to be in place for the brake controller wiring to be functional as well as there are some wires that need to be connected. It sounds like your fuses are good but the wiring is not in place yet. If you check out the attached help article you can see what needs to be done.
view full answer...
- Trailer Brake Controller Wiring Adapter for a 2010 Chevy Traverse and Tekonsha Prodigy ControllerThe Tekonsha Wire Replacement, # 3026-P, is the correct wiring adapter for a 2010 Chevy Traverse with a factory installed 7-Way trailer connector. I have included a link to the installation instructions for the adapter for you. This harness is also compatible with the Tekonsha P2 Brake Controller, # 90885.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Video Edited:
Joshua S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Video by:
Dustin K
Installed by:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Daniel
1/6/2024
This connector worked well, installed easily