Can I Use the Zero-Leak Mounting Hardware to Install a Camco 40443 Vent Cover

Question

Question:

Will this hardware MA00-225000 work with Camco 40443

asked by: Dave

0

Expert Reply:

Yes. The Replacement Zero-Leak Mounting Hardware # MA00-225000 can be used to install the Camco RV and Enclosed Trailer Roof Vent Cover w/ Detachable Louvered Screen - Black # CAM40443; it's actually pretty much the exact same hardware that comes with the Camco vent cover, so it'll do a great job.

expert reply by: Erik B

0

Answer 1

Both the MaxxAir Standard RV and Trailer Roof Vent Cover part #MA00-933066 and the Camco RV and Enclosed Trailer Roof Vent Cover w/ Detachable Louvered Screen part #CAM40431 are designed to fit 14" x 14" roof vents. The overall dimensions…

view full answer...

Answer 2

We definitely have bug screens for the Fan-Tastic Vent Cover #FVU1500WH. The #FVU1550WH will snap right into place without the need of any other hardware. The typical Fan-Tastic Vent lid will open to 11 1/2 inches tall and the cover is 10 1/4 inches…

view full answer...

Answer 3

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 4

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 5

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Then I do have some good news for you Rick. The BAKFlip MX4 Hard Tonneau Cover #BAK448130 will not block the camera on your 2024 GMC Sierra 1500 Denali short bed truck. This is the correct cover for your truck not having the CarbonPro bed.

view full answer...

Answer 9

I do see the BAKFlip MX4 Hard Tonneau Cover #BAK52FR you found is for a short CarbonPro bed on your 2024 GMC Sierra 1500 Denali. This will interfere with the 3rd brake light bed camera on your truck. I recommend looking at the Pace Edwards…

view full answer...

Answer 10

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 11

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...