Can Reese Trailer Hitch Locks Be Ordered With Specific Key

Question

Question:

I have 6 Reese hitch locks that are all keyed the same. The key has AG21 on it. Can I get 6 more that match that key?

asked by: Gary A

0

Expert Reply:

There isn't a way to get a Reese hitch lock with a specific key number on it, so the best we can offer are new, keyed-alike trailer hitch locks, depending on if you need a standard hitch receiver lock, a trailer coupler surround style lock, or a trailer coupler latch-style lock. You would just need to select the "Keyed Alike" option on the product page.

Trailer Hitch Receiver Lock:
- Trailer Hitch Receiver Lock for 1-1/4" Hitches # e98879
- Trailer Hitch Receiver Lock for 2" and 2-1/2" Hitches # e98881

Trailer Coupler Surround Style Lock:
- Fastway Universal Trailer Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers # FA86-0015-318

Trailer Coupler Latch Style Lock:
- Trailer Coupler Latch Lock - 7/8" Span # e98889
- Trailer Coupler Latch Lock - 2" Span # e98886
- Trailer Coupler Latch Lock - 3-3/8" Span # e98888

expert reply by: Kyle S

0

Answer 1

We do have a set of keyed-alike 5/8" hitch pin locks and trailer coupler locks, which fit standard hitch ball couplers. What you are looking for is the etrailer Hitch Receiver and Coupler Lock Set - 2" Hitch - 1/2" Coupler Latch -…

view full answer...

Answer 2

The etrailer Trailer Wheel Lock #288-02020 is keyed unique. Someone else who has this wheel lock would not be able to use their key to remove this from your tire.

view full answer...

Answer 3

Yes, the keys from our etrailer.com Coupler Lock, #e98889, and other etrailer.com locks can be replaced if they are lost, but I strongly recommend recording the key number that is stamped on the key. The key number is used for replacement keys, so I…

view full answer...

Answer 4

To select the correct ball mount that will allow you to tow level, you must take two measurements into consideration. First, measure from the ground (on level ground) to the top inside portion of your square hitch receiver opening. Second, measure…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

We haven't had any issues with the InfiniteRule Locking Pins part #IR57RR coming loose so I wouldn't anticipate that being a problem at all. When these are in the locked position they actually can't thread on or off.

view full answer...

Can Reese Trailer Hitch Locks Be Ordered With Specific Key

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching